Journal articles (OpenAlex)

Recent stories from Journal articles (OpenAlex).

Tech and Pols can't read this feed right now, so these stories may be out of date. For the newest stories, go to Journal articles (OpenAlex).

Journal articles (OpenAlex) Ch. Sreedhar, Dr. Ch. Raja, Dr. Amit Jain · Acta Innovations

ADAPTIVE 3D CHIPLET ARCHITECTURE WITH HYBRID WIRED–WIRELESS INTERCONNECT FOR ENERGY-EFFICIENT HETEROGENEOUS COMPUTING

Chiplet integration provides a scalable alternative to monolithic system-on-chip design, but the decomposition of a large die introduces a communication penalty arising from die-to-die interfaces, inter-chiplet distance, routing hops, and packaging overhead. This paper develops an adaptive three-dimensional (3D) chiplet architecture that combines decomposition-aware chiplet selection, vertically stacked compute–memory organization, and a hybrid wired–wireless interconnection…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Praveen Kumar Pandey, Meena Raju · Scientific Reports

Cement-free composite brick from waste foundry sand and mixed post-consumer thermoplastic waste for sustainable construction

The emergence of environmentally conscious construction practices aligned with circular economy principles has become increasingly important due to the accelerating depletion of natural resources. Therefore, this study aims to develop a value-added pathway for the reutilisation of waste plastic and foundry sand to create a cement-free perforated composite brick using waste foundry sand (WFS) and mixed post-consumer thermoplastic waste (PTW). The PTW comprised polyethylene…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Raghunath Mallavarapu, P. Kanaka Raju, Chandu Kavitha · Array

Optimized deep transfer learning for ADAS sensor fusion: YOLOv8 and planet optimization-tuned BiGRU approach

Object recognition and detection using high-definition video data and millimeter-wave radar can significantly enhance the safety of intelligent driving systems. However, integrating data from these modalities poses challenges due to differences in data formats, coordinate transformations, and mismatched data levels. Ensuring precise detection of surrounding objects is crucial for autonomous vehicle decision-making and safe driving. In complex traffic conditions, occlusion…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Suhasini Jindal, Harshita Jain, Lovepreet Singh · Discover Energy

A critical review of barriers to achieving net-zero emissions in the information technology-enabled services sector

Information Technology-Enabled Services (ITeS) have typically been viewed as producing less carbon emissions than sectors that are energy- and material-intensive. However, the rapid expansion of cloud computing, data centres, artificial intelligence, platform-based services, and globally distributed digital operations is increasing the sector’s electricity demand and associated greenhouse gas emissions. This systematic review synthesises 78 studies to identify the principal…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Manjunatha Mahadevappa, N. Suresh, Vivek Bindiganavile et al. · Journal of Structural Fire Engineering

Elevated temperature effects on elastic modulus degradation and microstructural evolution of waste foundry sand concrete

Purpose The present investigation aims to examine the impacts of high temperature on the flexural strength and modulus of elasticity properties of concrete specimens produced by substituting waste foundry sand at 25%, 50%, 75% and 100% of the river sand. The modulus of elasticity and flexural strength of samples with 100% waste foundry sand (CFS-4) content decreases as the temperature increases. At 600°C temperature, the specimens with 100% waste foundry sand (CFS-4) shows…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Paul Craddock · METALLA

New Evidence for Iron Smelting on the Greek Furnace / Foundry Vessels

This paper concerns a previously neglected Greek black-figure vessel depicting iron smelting. The importance of the vessel is that it depicts a group of men hammering a large flaming block. This, when taken in context with the scenes shown on some of the well-known furnace / foundry vessels shows that the operation is clearly that of bloom smithing a freshly smelted iron bloom. It is the only depiction of such an operation known from antiquity. Together with the various…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tianmiao Zhang · Applied and Computational Engineering

Network-on-Chip Technology for Chiplet Integration Architecture

In today's era, the marginal benefits of transistor scaling are continuously decreasing, and Chiplet heterogeneous integration has become the mainstream path for scaling AI chip computing power. Meanwhile, on-chip interconnect performance is increasingly becoming the key factor limiting system computing power and energy efficiency. This paper focuses on on-chip network technology for Chiplet-integrated AI chip architectures, providing a systematic review and analysis of its…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Arkadev Roy, Daniel Klawson, Jianheng Luo et al. · Optics Letters

Zero-change foundry compatible silicon photonics MEMS optical switch

Large-scale photonic switches are emerging as essential devices for energy-efficient optical interconnects in data centers and AI/ML clusters as a key enabler for high-bandwidth and low-latency connectivity. Combining micro-electro-mechanical (MEMS) based mechanical reconfigurability with silicon photonic integrated circuits can enable a large-scale, low-loss, programmable platform required for large-scale optical circuit switches. We demonstrate a broadband silicon…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Peng Wang, Meng Qin · Sustainability

Geopolitical Pressure and the Resilience of China’s Resource Governance System on the Pathway to an Environmental Economy

China’s resource, energy transition and supply chain governance institutions are increasingly tested by geopolitical pressure centred on China. Treating that pressure as the external environment of the national governance system, this study asks where it reaches the material foundations of the pathway to an environmental economy, transition-critical metals and clean energy equities, and where it is contained. We construct a relative measure that isolates China-centred…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Md. Rownak Hossain, Kazi Asifuzzaman, Mostafizur Rahman · Future Generation Computer Systems

Memory-aware scheduling of AI workloads on a Messaging-based vector processing unit

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Seyed Zeynab Hosseini, Parviz Fattahi, Saeed Emami · Journal of Simulation

Increasing steel production line productivity using lean production and simulation with uncertainty: a case study

Many large manufacturing plants implement lean manufacturing principles to identify and eliminate non-value-added activities that generate waste. A key tool in lean manufacturing is Value Stream Mapping (VSM), which helps visualize production processes and identify inefficiencies. However, VSM is a static tool and cannot dynamically assess the impact of lean improvements or compare different implementation scenarios. To address this limitation, simulation tools are valuable…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kangxi Feng · Applied and Computational Engineering

The Functions of Architecture of System-on Chips and Development Prospects of Combining with Artificial Intelligence

In the current era of the 21st century, as the world's population has already reached a historic milestone of 8 billion, the urban scale has expanded and the population density of cities has tremendously risen. Similar to the trend of urban construction, the chips have also developed. For instance, the SoC (System-on-Chip) has some key additions, including upgraded ray tracing-supportive GPUs, new CPU microarchitectures and dedicated artificial intelligence accelerators…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ramesh Kumar, Sudarshan Ainwad, K.S. Ranjani et al. · International Journal of Production Research

Digital transformation of wafer fabrication process: a case of semiconductor manufacturing

Semiconductors are essential for the digital revolution, modern electronics, and global economic growth. However, the growing demand, geopolitical tensions, and supply chain disruptions have accelerated the adoption of artificial intelligence (AI) and digital technology (DT) in semiconductor manufacturing. To address this gap, we studied five use cases from leading semiconductor manufacturers (Intel, Micron, Sony, Samsung, and SK Hynix). We investigate the application of AI…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Noor Afsary, Shubham Mishra, Vishal Saxena · Optics Letters

Sub-mW low-latency silicon thermo-optic phase shifter using a foundry substrate undercut heater

We demonstrate a compact, foundry-compatible silicon thermo-optic phase shifter (TOPS) based on a substrate-undercut doped-silicon heater, achieving a π -phase-shift power of P π =0.74 mW at a drive voltage of only V π =0.91 V. Prior low-power phase shifters reach comparable or lower P π only by extending the heated length, enlarging the footprint, and none report CMOS-compatible drive voltages. Here, both the heater and the 2×2 multimode interference (MMI) couplers are…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Chaebeen Yun, Seolim Yoon, Myung Jun Kim · Materials & Design

Unidirectional Cu filling of TGVs using highly-concentrated Cu-MSA electrolytes

Glass substrates have recently attracted considerable attention as next-generation semiconductor packaging platforms capable of replacing conventional Si interposers and organic substrates for AI accelerators and other advanced semiconductor packages. However, the commercialization of glass substrates is hindered by their low manufacturing yield and poor process productivity. Through-glass vias (TGVs) provide the essential vertical electrical interconnections in glass…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Suruchi Bala, James Blatcher, Hodjat Hajian et al. · IEEE Photonics Technology Letters

Silicon Photonic Integrated Circuit DBRs Using Foundry-Based 248-nm DUV Lithography

Silicon-on-insulator (SOI) platforms enable compact and high-performance photonic devices due to their strong refractive index (RI) contrast, but device performance is highly sensitive to dimensional variations, particularly for periodic structures such as distributed Bragg reflectors (DBRs). Their implementation in standard 248 nm deep ultraviolet (DUV) multi project wafer (MPW) foundry platforms is particularly challenging due to minimum feature size (MFS) constraints and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Juan Luis Soler-Fernández, Angel Dieguez, Joan Daniel Prades et al. · Scientific Reports

An n-FET-only IGZO low-dropout regulator evaluated under practical power-management conditions

Power-management circuits remain underdeveloped in flexible electronics, limiting autonomous sensing and control systems. Thin-film transistor low-dropout (LDO) regulators have demonstrated voltage regulation beyond silicon, but standalone metrics alone do not show whether foundry-enabled IGZO regulators can support practical low-power rails. We report an n-FET-only IGZO low-dropout regulator evaluated as a power-management block, not only as a standalone circuit. The…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Prasenjit Chakraborty, Zehao Lu · ACM Transactions on Architecture and Code Optimization

A Bandwidth-Balanced Adaptive Technique for Mesh-Based I/O Chiplets

As the semiconductor industry rapidly embraces chiplet-based architectures to satisfy AI-driven high-performance computing demands, the flexible, scalable I/O‑Die (IOD) chiplet offers a promising path toward solving the AI memory wall. However, the design of these IOD chiplets for flexibility and reuse across products dictates a fixed peripheral placement for all memory controllers and die-to-die interfaces, creating unique and largely unexplored challenges. This rigid…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yeji Lee, Vineeth Kumar Bandari, Daniil Karnaushenko et al. · Small Methods

Solid‐Liquid Interdiffusion Bonding Enabling Heterogeneous Integration on Flexible and Shapeable Polymer Platforms

The integration of rigid microscale electronics onto soft and flexible polymer substrates remains a key challenge for flexible electronics, biointegrated systems, and body-first microrobotics, where the mechanical body, material architecture, morphology, and primary functions are designed first, while the electronic processing unit (e.g., a Si CMOS chiplet), acting as the brain to control the robot´s functionalities, is integrated later. Existing approaches, including…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Romio Mandal, Vislavath Haripan, Uma Shankar Biswal et al. · European Journal of Environmental and Civil engineering

Towards sustainable 3D concrete printing: influence of waste foundry sand on rheology and printability of OPC–LC2 systems

Concrete demand depletes natural resources and increases CO2 emissions; simultaneously, industrial waste causes land pollution. Using waste foundry sand (FS) and low-carbon limestone calcined clay (LC2) offers a sustainable solution to these challenges. In this study, quartz sand (QS) was partially replaced with 10–30% FS to develop OPC–LC2-based 3D-printed concrete (3DPC). The fresh properties investigated include flow table diameter, static and dynamic yield stresses, and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Shengli Hu, Hui Ge, Shaohua Wu et al. · International Journal of Metalcasting

Research on Low-Temperature Regeneration Process of Waste Foundry Clay Sand Based on Catalytic Oxidation

Abstract With the increasing stringency of environmental regulations, the efficient reclamation of used clay-bonded sand has become a crucial pathway for the sustainable development of the foundry industry. Traditional reclamation processes, which combine high-temperature roasting with mechanical attrition, suffer from prominent issues such as high energy consumption and long processing cycles. To address these challenges, this paper proposes a novel low-temperature and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Anna Pirogova · International Review of Economics & Finance

Watts to wealth: Electricity, efficiency, and industrial asset pricing

I develop a production-based asset-pricing framework that puts electricity at the center of return formation. A dual-output technology motivated by the SIDO framework, underpins the two price-orthogonalised predictors: a scale signal (ΔEC) and an efficiency residual (EE(net)). Using year-over-year (YoY) panels for Italy and Sweden across key industrial sectors, I select forecasting lags by BIC and include fixed effects.At the annual horizon, signals are clearest, but they…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Talha Waseem, Michael Schmidt, Noah Schnurrenberger et al. · International Journal of Metalcasting

Recycling of Dusts from Iron Foundries by Incorporation into Silicon Carbide Briquettes

Dusts from iron foundries are considered hazardous waste due to increased heavy metal contents. They are nowadays often landfilled, although they contain valuable constituents such as iron and quartz which could be recycled. Silicon carbide (SiC) briquettes are used in iron foundries to provide silicon and carbon as alloying elements. In this study, the incorporation of iron foundry dusts in SiC briquettes is investigated. Eight dust types originating from distinct process…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) R. Dańko, Angelika Kmita, Daniel Robert Gruszka · Materials

Comparative Study of Spent Sand Reclamation from Binder Jetting and Conventional Foundry Technologies

The growing use of binder jetting in foundry practice has increased the need for effective recovery of the fine silica sand used in additively manufactured molds. This study examines mechanical and thermal reclamation of spent furfuryl-resin sands obtained from binder-jetted molds (US-1) and conventionally manufactured molds (US-2) after ductile iron casting. Mechanical reclamation was conducted at rotor speeds of 280–560 rpm for 10–30 min, whereas thermal reclamation was…

Read at Journal articles (OpenAlex)

Older stories