Chips and semiconductors: research

Journal articles, academic blogs, think-tank reports and papers in this section, newest first. Back to the news.

Journal articles (OpenAlex) Prasenjit Chakraborty, Zehao Lu · ACM Transactions on Architecture and Code Optimization

A Bandwidth-Balanced Adaptive Technique for Mesh-Based I/O Chiplets

As the semiconductor industry rapidly embraces chiplet-based architectures to satisfy AI-driven high-performance computing demands, the flexible, scalable I/O‑Die (IOD) chiplet offers a promising path toward solving the AI memory wall. However, the design of these IOD chiplets for flexibility and reuse across products dictates a fixed peripheral placement for all memory controllers and die-to-die interfaces, creating unique and largely unexplored challenges. This rigid…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yeji Lee, Vineeth Kumar Bandari, Daniil Karnaushenko et al. · Small Methods

Solid‐Liquid Interdiffusion Bonding Enabling Heterogeneous Integration on Flexible and Shapeable Polymer Platforms

The integration of rigid microscale electronics onto soft and flexible polymer substrates remains a key challenge for flexible electronics, biointegrated systems, and body-first microrobotics, where the mechanical body, material architecture, morphology, and primary functions are designed first, while the electronic processing unit (e.g., a Si CMOS chiplet), acting as the brain to control the robot´s functionalities, is integrated later. Existing approaches, including…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Romio Mandal, Vislavath Haripan, Uma Shankar Biswal et al. · European Journal of Environmental and Civil engineering

Towards sustainable 3D concrete printing: influence of waste foundry sand on rheology and printability of OPC–LC2 systems

Concrete demand depletes natural resources and increases CO2 emissions; simultaneously, industrial waste causes land pollution. Using waste foundry sand (FS) and low-carbon limestone calcined clay (LC2) offers a sustainable solution to these challenges. In this study, quartz sand (QS) was partially replaced with 10–30% FS to develop OPC–LC2-based 3D-printed concrete (3DPC). The fresh properties investigated include flow table diameter, static and dynamic yield stresses, and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Shengli Hu, Hui Ge, Shaohua Wu et al. · International Journal of Metalcasting

Research on Low-Temperature Regeneration Process of Waste Foundry Clay Sand Based on Catalytic Oxidation

Abstract With the increasing stringency of environmental regulations, the efficient reclamation of used clay-bonded sand has become a crucial pathway for the sustainable development of the foundry industry. Traditional reclamation processes, which combine high-temperature roasting with mechanical attrition, suffer from prominent issues such as high energy consumption and long processing cycles. To address these challenges, this paper proposes a novel low-temperature and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Anna Pirogova · International Review of Economics & Finance

Watts to wealth: Electricity, efficiency, and industrial asset pricing

I develop a production-based asset-pricing framework that puts electricity at the center of return formation. A dual-output technology motivated by the SIDO framework, underpins the two price-orthogonalised predictors: a scale signal (ΔEC) and an efficiency residual (EE(net)). Using year-over-year (YoY) panels for Italy and Sweden across key industrial sectors, I select forecasting lags by BIC and include fixed effects.At the annual horizon, signals are clearest, but they…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Talha Waseem, Michael Schmidt, Noah Schnurrenberger et al. · International Journal of Metalcasting

Recycling of Dusts from Iron Foundries by Incorporation into Silicon Carbide Briquettes

Dusts from iron foundries are considered hazardous waste due to increased heavy metal contents. They are nowadays often landfilled, although they contain valuable constituents such as iron and quartz which could be recycled. Silicon carbide (SiC) briquettes are used in iron foundries to provide silicon and carbon as alloying elements. In this study, the incorporation of iron foundry dusts in SiC briquettes is investigated. Eight dust types originating from distinct process…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) R. Dańko, Angelika Kmita, Daniel Robert Gruszka · Materials

Comparative Study of Spent Sand Reclamation from Binder Jetting and Conventional Foundry Technologies

The growing use of binder jetting in foundry practice has increased the need for effective recovery of the fine silica sand used in additively manufactured molds. This study examines mechanical and thermal reclamation of spent furfuryl-resin sands obtained from binder-jetted molds (US-1) and conventionally manufactured molds (US-2) after ductile iron casting. Mechanical reclamation was conducted at rotor speeds of 280–560 rpm for 10–30 min, whereas thermal reclamation was…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Bram Smolenaars, Alp Akçay, Ivo Adan · Production & Manufacturing Research

Ramp-up performance measurement in job–shop systems using real-time location data: a case study in semiconductor manufacturing

Production ramp-up is traditionally characterized by instability, unpredictability, and complexity. Industry 4.0 is changing the future of ramp-up management by facilitating the quantification of early-stage ramp-up performance and enabling manufacturers to accelerate their ramp-up. This work contributes to ramp-up manufacturing by (i) introducing a performance measurement framework specifically designed for job–shop environments and (ii) developing and implementing a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Armin Khaleghi Forghani, Tiago Botelho, Niloofar Salajegheh et al. · Venture Capital Startups

How experience shapes startup screening: cognitive strategies of startup accelerator evaluators

Accelerators screen large numbers of early-stage ventures under f uncertainty, limited information, and time pressure. Yet, little is known about how evaluative experience shapes the cognitive processes underlying initial screening decisions. Using Verbal Protocol Analysis (VPA), this exploratory study captures evaluators’ concurrent verbalizations as they assess startup applications, enabling a comparison of how novice and experienced evaluators process information in real…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sim Bouwmans, Vadim Banine, Job Beckers et al. · Physics of Plasmas

Particle charging and lofting from a surface under plasma conditions relevant for space and EUV applications

Particle removal from sensitive surfaces is of great importance in the space and semiconductor industries. To remove particles from surfaces, the force balance between adhesive and repelling forces must be shifted toward a net repelling force. In low-pressure environments, this may be achieved by an electric charge on the particle in combination with an electric field. Particle charging arises from exposure to electric or photon currents, which are conditions prevalent in…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kristi Govella · Asian Politics & Policy

Tools of Japanese Economic Statecraft and Firm Responses: Case Studies of Rare Earths, COVID‐19, and Semiconductors

ABSTRACT Governments have increasingly turned to economic statecraft to address negative security externalities resulting from economic interdependence. How have governments attempted to shape the behavior of firms, and how have firms responded? This article examines Japanese economic statecraft in response to the 2010 Chinese rare earths export ban, COVID‐19 pandemic supply chain disruptions, and semiconductor supply chain vulnerability. The Japanese government has used a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tanishq Kekre, Sumit K. Mandal · IEEE Embedded Systems Letters

Energy-Efficient Checkpointing for IMC-Based AI Accelerators Using 3.5 D Packaging

In-memory computing (IMC) techniques provides an energy-efficient way to train artificial intelligence (AI) and machine learning (ML) models. Furthermore, 2.5-D integration made it possible to store the weights of a large AI model on the compute system itself. However, resistive random access memory (ReRAM)-based IMC devices may fail abruptly due to frequent memory writes during training, coupled with their low endurance. Since the training of an AI model is an iterative…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Thomas J. Chemmanur, Di Tang, Chaopeng Wu · Journal of Financial Intermediation

Talent attraction policies, corporate innovation, and spillover effects

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Prosper Dellah Allo, Aadhi Al-Rahim, Amirhossein Mosaddegh et al. · Advanced Optical Materials

Photoluminescent Color Centers on a Mainstream Silicon Photonic Foundry Platform

ABSTRACT Silicon photonic integrated circuits fabricated on commercial CMOS‐compatible foundries have propelled major advances in data center communication, quantum computing, and artificial intelligence due to their scalability, mass production, low cost, and high performance. However, the indirect bandgap of silicon prevents the realization of efficient silicon light sources on these mainstream silicon‐on‐insulator (SOI) platforms. Luminescent color centers in silicon have…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jia Li, Haojie Hua, Lei Xu et al. · Industrial Crops and Products

Carbonized rice straw as a sustainable additive for coal-free molding sand

Traditional green sand casting relies on coal powder as an additive to improve molding sand performance. Given the depletion of fossil fuels and increasing demand for sustainable manufacturing, we investigated carbonized rice straw as a renewable carbonaceous additive for green sand bonded with natural sodium-bentonite. Raw rice straw and bentonite were pretreated, and their phase compositions, microstructures, and elemental distributions were characterized using X-ray…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Devansh Jain, Akash Pardeshi, Marco Frigo et al. · Proceedings of the ACM on Programming Languages

Automatically Generating ML Compiler Backends from Tensor Accelerator ISA Descriptions

Machine learning (ML) compilers play a key role in enabling high-performance implementations of ML workloads. These compilers use existing CPU and GPU backends to generate device-specific code. In recent years, many tensor accelerators (or AI accelerators) have been designed to further accelerate these workloads, with commercial products like AWS Trainium publicly available. However, compared to commodity hardware, a majority of tensor accelerators do not have mature ML…

Read at Journal articles (OpenAlex)

arXiv (research papers) Yunjia Zheng SI

Towards Efficient HPC Systems for Agents: Challenges and Opportunities

Coding agents have become real users of high-performance computing (HPC) systems, yet today's HPC abstractions, interfaces, and policies remain designed for human-driven workflows. In our measurement, users running coding agents are only 19.5% of the observed population, but account for 55.8% of job submissions, 29.1% of CPU core-hours, and 42.7% of GPU-hours. Agents are not simply faster humans. They issue commands at 20.8x the human rate, decompose work into fine-grained…

Read at arXiv (research papers)

Journal articles (OpenAlex) Alexander Kutuzov, Vania Sena, Ali Samei et al. · Small Business International Review Startups

The effect of business accelerators on regional venture capital funding in the UK

Over the past twenty years, numerous local governments in various countries have set up accelerators and incubators to fund start-ups and help transform their local economies. However, there is limited evidence regarding the impact of these programmes on the availability and supply of seed and early-stage venture capital in their regions. This study examines the effects of business accelerators on total venture funding in UK Local Enterprise Partnerships (LEPs) from 1998 to…

Read at Journal articles (OpenAlex)

Latinoamérica21 Wendy Esther Morán Ortega Geopolitics

The Mexico Plan and the reconfiguration of semiconductor supply chains in Latin America

The Mexico Plan seeks to attract investment in semiconductors, but it could reinforce Latin America’s dependence on the U.S. and its role as an assembler. O post The Mexico Plan and the reconfiguration of semiconductor supply chains in Latin America apareceu primeiro em Latinoamérica 21.

Read at Latinoamérica21

Journal articles (OpenAlex) Yonggi Kim, KwangWook Gang, Byungchul Choi · Structural Change and Economic Dynamics Startups

Cross-border venture capital in the semiconductor industry: Knowledge spillover or capital deepening?

Cross-border venture capital (CB VC) is widely assumed to accelerate technological diffusion, yet whether it generates knowledge spillovers or primarily reallocates financial capital remains empirically unresolved. Drawing on 13,362 semiconductor VC investment rounds worldwide (1981–2024), from which we identify 3,363 cross-border rounds across roughly 470 investor→target corridors and analyse the 47 corridors with complete covariates, merged with USPTO patent data, this…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Vicente K. Veiga, Fábio Benevenuti, Arthur Ely et al. · Journal of Integrated Circuits and Systems

Exploring Power-Performance Trade-offs in Softcore RISC-V with CNN Accelerators for Digital Agriculture and Smart Farming

This study presents a detailed exploration of RISC-V softcore assisted by Convolutional Neural Networks (CNNs) accelerators for image classification in tasks associated with digital agriculture, including land cover classification, crop disease detection, and seed quality analysis. Like other sectors, agriculture is becoming a knowledge-intensive enterprise. We address the computational and energy demands of CNNs where processing is offloaded to the edge, often using…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Eun-jeong Yoo · Journal of Korea Trade Geopolitics

Export Controls and Supply Chain Reconfiguration: Evidence from the Global Semiconductor Industry

Purpose – This study empirically investigates how export controls affect the reconfiguration of global semiconductor supply chains, focusing on whether policy shocks reduce trade or induce trade reallocation across countries and production stages. Design/Methodology –Using BACI HS6 bilateral trade data, this study constructs a panel dataset that classifies semiconductor products by production stage (EQUIP, FAB, MAT, PART) and policy targeted categories. The empirical…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yvette To, Winston Lee · Journal of Current Chinese Affairs Geopolitics

Promoting Technological Upgrading in Strategic Industries: Chinese State-Directed Techno-Capitalism in the Semiconductor Industry

Scholarship on new state capitalism posits that states have become increasingly visible in advancing national strategic objectives. Nevertheless, further research is needed to delineate the new extent and forms of state functions. In response, this article examines how states and state capital have been reconfigured in the national pursuit of vital resources. Drawing on analytical concepts from the new state capitalism literature, we propose a framework of state-directed…

Read at Journal articles (OpenAlex)

Berkeley AI Research blog SI

From CUDA to MLX: How K-Search Brings Decades of Kernel Expertise to Apple Silicon

Figure 1: CUDA-to-MLX optimization translation map. CUDA optimization knowledge can be translated into architecture-native MLX strategies rather than copied instruction-for-instruction. We face a new epoch in computing. Hardware is changing rapidly — not just faster GPUs, but a growing range of chips from different vendors, each with its own architecture and often tailored to specific AI workloads. Software is changing just as fast, and AI coding tools now generate in…

Read at Berkeley AI Research blog

Journal articles (OpenAlex) Joseph Baines, Steve Rolf, Julian Germann · Economic Geography Geopolitics

The Spatial Limits to Weaponizing Interdependence: TSMC in the US–China Chip War

The US–China rivalry is focusing attention on how geoeconomics impacts corporate operations and global production networks. States are seeking to weaponize interdependence through policies like sanctions and export controls, and through instrumentalizing corporations as tools to secure relative gains over geopolitical rivals. This article examines how firms’ territorial embeddedness complicates states’ weaponization efforts. To illustrate this phenomenon, we investigate…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jon Truby, Andrew Mazen Dahdal, Rafael Dean Brown et al. · Research in Globalization Geopolitics

Diplomacy in the age of AI: Legal and strategic approaches to techno-nationalism, regulatory soft power and the AI chips race

This article explores how the Artificial Intelligence (AI) race has intensified global com- petition but also created avenues for international cooperation and developments in inter- national law. The study refines the concept of ‘Tech Diplomacy’ and introduces a novel definition of ‘AI Diplomacy’ as distinguished from ‘AI Statehood’ and ‘AI Sovereignty’. The examination concludes by identifying how ‘AI Diplomacy’ through governance and capacity-building can become a tool…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Henry Wai‐chung Yeung · Regional Studies Regional Science Geopolitics

Uneven regional development in a contentious world of changing global production networks: ‘chips war’ and the geopolitics of semiconductor production in the United States and Southeast Asia

Since the late 2010s, the global economy has been confronted with immense challenges – from geopolitical tensions and climate change to the COVID-19 pandemic, territorial wars, trade conflicts and so on. While the unfettered economic globalisation of the 1990s and the 2000s might be over, a renewed interest in the global shift of industrial production (back to developed countries and their allies) has now preoccupied the policy priorities of many state authorities and…

Read at Journal articles (OpenAlex)

Older stories