Robotics: research

Journal articles, academic blogs, think-tank reports and papers in this section, newest first. Back to the news.

Journal articles (OpenAlex) Zang Yi, Huijun Wang, Yi Cao et al. · Modelling—International Open Access Journal of Modelling in Engineering Science

Multi-Strategy Whale Optimization for Open Complete-Coverage Path Planning of Aircraft-Skin Wall-Climbing Robots

Aircraft-skin maintenance requires complete surface-cell visitation, admissible cross-component transfers and local exclusion bypasses. This study develops an offline open complete-coverage planner on the NASA Common Research Model using a multi-strategy whale optimization algorithm (MSWOA). The method integrates aircraft-surface continuity preference with transition consistency (ASCP-TC) for topology-aware seeding, permutation-aware rank rejuvenation (PARR) for discrete…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jungwoo Lee, Jong-Deuk Lee, Young‐Ho Choi et al. · Robotics

Training-Free Inference-Budget Reduction in Flow-Matching Vision–Language–Action Models for Robot Manipulation: An Evaluation Against a Prespecified Task-Success Margin

Flow-matching vision–language–action (VLA) models generate robot actions through iterative denoising, making inference latency a deployment constraint. The acceleration methods reviewed here rarely assess task-success retention against a margin fixed before evaluation. We study three weight-preserving runtime levers on SmolVLA and π0.5: denoising-step count, masked camera prefix elimination, and execution horizon. In simulated closed-loop LIBERO evaluations, three…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Junyeong Jeon, Daniel Poul Mtowe, Dong Min Kim · Frontiers in Robotics and AI

Computation offloading and information freshness in edge-assisted networked robotic systems

Camera-based wireless networked control systems must move visual information across a shared wireless link before a command can be applied, so the placement of the perception computation fixes both the communication load and the freshness of the information that drives the actuator. We partition a road-following perception pipeline between a mobile robot and a remote controller at four cut points, spanning measured application payloads from a 61,570 B raw image (PUPPET) to a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Matteo Cioni, Maria Stella Valle, Laszlo Kovacs et al. · Sensors

Muscle Activation Timing and Synergies During End-Effector Robot-Assisted Gait: A Surface EMG Study

Surface electromyographic (SEMG) patterns during robot-assisted walking are still poorly documented. This study aimed to characterize the timing and synergies of muscle activations of the lower extremities during locomotion assisted with an end-effector robot. Healthy subjects walked at 1.8 km/h under two modes: passive and active with a full body weight load. The robotic gait cycle (RGC) was identified by detecting the flexion-extension phases of the right lower limb. SEMG…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Hao Yang, Baoyue Kuang, Zeyuan Chang et al. · Architectural Intelligence

BRAC-ACT: a task-structured robotic assembly framework for multi-stage Song-style dougong assembly

Abstract Traditional timber assembly, especially dougong assembly, involves strict sequential dependencies, complex spatial relationships, and long-horizon execution. This study aims to develop and evaluate BRAC-ACT, a task-structured robotic assembly framework that translates Song-style dougong tectonic logic into learnable, executable, and evaluable robotic tasks. A preliminary whole-task pilot was first conducted to examine complete-sequence ACT execution and informed the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Takuya Kiyokawa, Tomoki ISHIKURA, Shingo Hamada et al. · International Journal of Automation Technology

Component Influence-Driven Fastener Reduction for Robotic Disassemblability-Aware Design Simplification

Robotic disassembly must be considered during the product design phase to accelerate automated remanufacturing. However, designers currently lack quantitative feedback for identifying the structural elements that hinder robotic operations. To address this, this study proposes an analytical framework that provides actionable redesign guidance focused on fastener reduction, because fasteners are numerous and ubiquitous components found in almost all manufactured products…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Thomas Leitgeb, Wolfram Rollett, Katja Scharenberg · Frontiers in Education

Participation in a computational thinking and educational robotics elective and change in reasoning and complex problem-solving: a matched longitudinal study of a population-based regional cohort

Introduction This study examines whether participation in a computational thinking and educational robotics (CT&ER) elective is associated with differential change in reasoning and complex problem-solving among lower secondary students in Burgenland, Austria. Methods From a regional cohort of 1,676 seventh-grade students at all 38 public middle schools, 1,383 participated. In this longitudinal quasi-experimental design, students who chose the elective Coding & Robotik (C&R…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Keting Huang, Alice E. Martin, Jonathon Pipe et al. · Communications Chemistry

TARMAC as a taxonomy for robot manipulation in chemistry

Abstract Laboratory automation has benefited substantially from well-defined protocols and machine-readable representations of chemical procedures. Yet a long tail of context-dependent physical tasks, including setup, adjustment, and cleanup, continues to require manual intervention or bespoke robotic implementations tailored to individual workflows and platforms. This study examines whether this apparent diversity can be organized into a structured and reusable action…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Blaž Germšek, Izidor Založnik, Anze Turk · AgriEngineering

Introducing Agricultural Robotics and Unmanned Aerial Systems on Small, Fragmented Farms: First-Season (2026) Field Report from the Robot4Plants (IRP38) Consortium, Slovenia

The Robot4Plants consortium (intervention IRP38, Common Agricultural Policy (CAP) Strategic Plan of Slovenia) introduced agricultural robots and unmanned aerial systems (UASs) on partner farms and at public events in 2026. This Project Report documents that commissioning and demonstration phase at six purposively selected locations. Evidence comprises operator and advisor records, farm management records, an application record, robot telemetry, and photographs. An AgXeed…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yang Zhang · Theoretical and Natural Science

Reliable sEMG Motor Intent Perception for Upper Limb Rehabilitation Robots

For upper limb rehabilitation robots, surface electromyography (sEMG) is an essential signal source to assess motor-intent perception by the patients; however, the signals collected from patients are noisy and are different from person to person. Stable intent recognition is thus important with the use of reliable signal processing. This review poses the question of what denoising and information enhancement can do for sEMG-based motor-intent perception. It first outlines…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) L Wang, Jin Wang, Yadi Wang et al. · ACS Applied Polymer Materials

Bilayer Actuators Based on Interfacially Stable Poly(vinyl alcohol) Hydrogels: Concentration-Differentiated Bilayer Design and Sodium Citrate-Induced Salting Out Actuation for Soft Robotics

Abstract Hydrogel-based flexible actuators have attracted significant attention for their stimulus-responsive properties, yet the practical application of bilayer architectures remains hindered by interfacial instability caused by mismatched mechanical properties between heterogeneous layers. Inspired by the humidity-responsive asymmetric structure of pinecone scales, we fabricated a bilayer hydrogel actuator using PVA layers with different mass fractions. The actuator…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Qianen Zhou · Applied and Computational Engineering

Large Language Models for Industrial Robots: Applications, Challenges, and Future Directions

With the accelerating intelligent transformation of global manufacturing, industrial robots have become critical equipment in modern smart factories. However, the growing prevalence of multi-variety, small-batch production has made the high programming threshold, tedious reconfiguration, and limited environmental adaptability of traditional industrial robots increasingly prominent. Over the past few years, large language models (LLMs) have proven to have strong semantic…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Gholamreza Khodamipour · Scientific Reports

Model-free observer-based voltage control of non-holonomic mobile robot using reinforcement learning

This paper presents a trajectory tracking control strategy for non-holonomic mobile robots with unavailable orientation angle measurements. An observer is developed to reconstruct the trigonometric terms required by the controller, while the Fourier-series-based reinforcement learning scheme performs online estimation of unknown nonlinear terms, and the controller compensates for bounded external disturbances. The nonlinear system is transformed into lower dimensional…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Masoud Sotoodeh Bahraini, Ella‐Mae Hubbard, Tiziana C. Callari et al. · Journal of Manufacturing Systems

Human behaviour and intention prediction for industrial human-robot collaboration: Potentials, challenges, and opportunities

The behaviour of humans when collaborating with other actors such as other humans or robots has been studied for decades and remains critical for unlocking mixed human-robot team performance. To achieve better, more effective human-robot collaboration (HRC) in industrial settings, a robot needs to have robust models to predict human behaviour when working towards a shared goal. Inferring and modelling human intentions is expected to play a pivotal role in accurately…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Andreea Dana Alionte, Lucian Bogatu, Cristian Gabriel Alionte et al. · Applied Sciences

Study on a Modular and Reconfigurable Robot That Can Be Used in Natural Disaster Events

This paper presents a modular reconfigurable robotic system for search-and-rescue operations in natural catastrophe scenarios, addressing the structural rigidity, limited energy autonomy, and restricted victim-support capabilities of conventional rescue robots. The contributions are organized into four dimensions. First, a modular mechanical architecture is proposed in which modules operate independently or are interconnected through a multifunctional flexible tube providing…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Md. Istiak Morsalin, Vishesh Patel, Abigail Richard et al. · Logistics

Robotic OCR-Based Pallet Label Verification: Experimental Evaluation and Inventory Database Validation

Background: Pallet-label identification underpins warehouse inventory accuracy, but how imaging geometry affects optical character recognition (OCR) of robot-captured labels has not been characterized. This study evaluates a robotic OCR pipeline with database validation. Methods: An Ava Telepresence Robot captured label images, which the Google Cloud Vision API read and a simulated warehouse management system validated. A full-factorial experiment varied font size (12–16…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Omar Zahra, Abdenour Benkrid, Joseph Ridao et al. · Frontiers in Nuclear Engineering

Digital twins for robot-assisted nuclear decommissioning: a review of perception, radiological mapping, and model interoperability, with the DORADO project as a case study

Nuclear decommissioning increasingly relies on digital technologies to support characterisation, planning, monitoring, and decision-making in environments where access is limited by radiation, contamination, or other operational constraints. Digital twins provide a framework for integrating geometric, radiological, and operational information, while robotic systems acquire data and perform tasks with reduced human exposure. Although often treated separately, the two are…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jun Wan, Lve Wu, Zihao Zhou et al. · Scientific Reports

Primal–dual interior point strategy based parameter identification method for serial industrial robots

To accurately identify robot dynamics parameters and improve control performance, this paper proposes a full-parameter identification method based on primal–dual interior-point optimization (FPI-PDIP). Firstly, linearization of the robot dynamics equation combined with QR decomposition is adopted to extract the minimal set of inertial parameters (MSIP). Physical feasibility constraints are constructed according to the intrinsic physical characteristics of inertial…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jangmook Kang, Seongwon BAE, Jongbin Park et al. · Electronics

Cyber-Resilient Mapless Navigation for Autonomous Mobile Robots: Cloud-Independent Edge Inference with Distilled Vision–Language Semantic Embeddings and LiDAR Fusion

Autonomous mobile robots (AMRs) that depend on remote inference introduce communication and service availability into the navigation control path. This paper presents a cloud-independent mapless-navigation architecture integrating visual features distilled offline from a vision–language model, PointNet++ light detection and ranging (LiDAR) features, and a Twin Delayed Deep Deterministic Policy Gradient (TD3) controller. An 8-bit integer (INT8)-quantized Vision Transformer…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zhiyi Lyu, Hao Yang, Yanjin Tang et al. · Gels

Cellulose-Based Gels for Intelligent Tactile Electronic Skin: From Materials Design to Dexterous Robotic Manipulation

Cellulose-based gels are emerging as promising soft materials for tactile electronic skin (e-skin) because of their tunable network structures, mechanical compliance, sustainability, and compatibility with ionic and electronic conduction. This review examines recent progress from material and structural engineering to tactile sensing, machine learning (ML)-assisted signal interpretation, and robotic manipulation. Particular attention is given to regenerated cellulose…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tao Zhao, 伍恒发, Xin Dong et al. · Actuators

Dynamic Modeling and Cable Tension Optimization of a Redundantly Constrained Cable-Driven Parallel Robot

To address the problems of cable slackness and non-smooth cable-tension variation curves during the motion of an antagonistic cable-driven parallel robot (CDPR), this paper focuses on a three-degree-of-freedom (DOF) redundantly constrained CDPR. First, an inverse kinematics model of the robot is established using the vector closed-loop principle. Second, a dynamics model of the robot is established using the Newton–Euler method. Linear programming, quadratic programming, and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ahmed Nasr, Rowan Elselmy · Engineering Computations

Computational workflow integrating differential growth and robotic WAAM for fabrication-aware architectural design: a furniture-scale demonstrator

Purpose This study develops a fabrication-aware computational workflow for architectural applications using Wire-and-Arc Additive Manufacturing (WAAM). It addresses the gap in methods that integrate computational geometry with fabrication constraints, aiming to produce geometries that are both generative and manufacturable. The research formalizes a parameter-driven design-to-fabrication framework bridging computational modeling and robotic metal deposition, providing a…

Read at Journal articles (OpenAlex)

Older stories