IoT Insider

Recent stories from IoT Insider.

IoT Insider News Desk

Ericsson and Altair complete first 5G eRedCap network connection

Ericsson and Altair Semiconductor have completed what they describe as the first network connection using enhanced Reduced Capability (eRedCap), a development intended to bring lower-cost, lower-power 5G connectivity to a wider range of IoT devices. The test paired Ericsson’s radio access network (RAN) software with Altair’s ALT1550 modem, demonstrating a connection using the technology, which…

Read at IoT Insider

IoT Insider News Desk

Japan opens higher-power 850 MHz band for Wi-Fi HaLow

Japan has opened a new 850 MHz frequency band for Wi-Fi HaLow, allowing devices to transmit at up to ten times the power permitted in the country’s existing 920 MHz band. The move is expected to extend the technology’s potential into applications requiring continuous connectivity and higher data rates, including video surveillance, industrial monitoring and…

Read at IoT Insider

IoT Insider News Desk

Motorbike telematics set to more than triple by 2030

The number of motorbikes fitted with embedded telematics is forecast to more than triple over the next five years, as manufacturers increasingly turn to connectivity to deliver safety, security and connected services. The number of active OEM telematics systems installed in motorcycles, mopeds and scooters is expected to rise from 19.7 million at the end…

Read at IoT Insider

IoT Insider Lucy Barnard

Our pick: five must-watch electronica 2026 interviews for the IoT industry

From LoRa connectivity and Edge AI to Physical AI and intelligent embedded systems, exhibitors at electronica 2026 had a lot offer in terms of the technologies shaping the next generation of connected devices. The growing convergence of connectivity, artificial intelligence and embedded computing was a recurring theme at the show, as semiconductor manufacturers and technology…

Read at IoT Insider

IoT Insider News Desk

Thales and BR Captura examine how SGP.32 could reshape IoT connectivity in Latin America

Thales and BR Captura have published a joint paper examining what the SGP.32 eSIM standard could mean for IoT connectivity in Brazil and wider Latin America, arguing that it could give businesses greater control over how connected devices access mobile networks throughout their operational lives. The paper explores how organisations could adapt connectivity as coverage,…

Read at IoT Insider

IoT Insider Lucy Barnard

Electronica 2026: NXP targets robotics integration bottleneck with unified physical AI platform

NXP Semiconductors is seeking to reduce the time and complexity involved in developing autonomous robots with a new hardware and software platform that brings together artificial intelligence, motor control, connectivity and security. The Dutch semiconductor group unveiled its unified robotics platform at electronica 2026, positioning it as a way for developers to move from evaluating…

Read at IoT Insider

IoT Insider Dr Badri Gomatam

The operational upgrade powering AI-era fibre rollouts

For years, the conversation around fibre-to-the-home (FTTH) and 5G was dominated by ‘the digital divide’ – a race to get glass in the ground. But this is 2026, the narrative has shifted. With the explosion of Generative AI, the densification of 5G, and massive publicly funded broadband projects hitting their stride, the challenge isn’t just…

Read at IoT Insider

IoT Insider Joe Salvador

Precision timing requirements in consumer wearables and screenless IoT devices

Consumer wearables have evolved from basic step counters into sensor rich AI-enabled compute devices that provide biometric monitoring, motion analysis, and real-time contextual interaction. Popular categories include smartwatches, fitness trackers, earbuds, and AR/VR devices, with an emerging class of screenless designs supporting continuous, context-aware operation through voice input and on-device sensing. Precision timing components maintain…

Read at IoT Insider

IoT Insider Tomohide Yamazaki

Wireless reliability under industrial pressure

Automated guided vehicles (AGVs) and autonomous mobile robots (AMRs) are becoming central to smart factories and warehouses as manufacturers look to tackle labour shortages and improve productivity. In factories and warehouses, transport robots move parts, pallets, and finished goods between production lines, storage areas, and packing stations. In e-commerce fulfilment centres, AMRs are also increasingly…

Read at IoT Insider

IoT Insider Lucy Barnard

S8:E4 – How IoT is bringing agriculture closer to autonomous farming

In this episode of IoT Unplugged, Alper Yegin, CEO of the LoRa Alliance, explains how long-range, low-power connectivity is helping farmers tackle rising costs, labour shortages and climate uncertainty, while making agriculture more productive and sustainable. Yegin argues that agriculture is undergoing a digital transformation as pressure to increase food production coincides with advances in…

Read at IoT Insider

IoT Insider Mads Fischer

Speed versus complexity in AI IoT design

Digital transformation is affecting sectors as diverse as manufacturing, retail, smart cities, smart homes, transportation, logistics, utilities, healthcare, and public safety. The integration of technologies such as AI, Cloud computing, and IoT is changing the way companies and organisations operate and deliver value. The aim of digital transformation is to increase efficiency and competitiveness by…

Read at IoT Insider

IoT Insider Daria Chumak

Inside Wialon’s Dakar challenge: a multi-layer IoT deployment in the Saudi Arabian Desert

In the Saudi Arabian desert, Wialon transformed a Dakar-inspired off-road challenge into a live stress test for fleet IoT infrastructure. Darya Chumak, Head of Partner Success at Wialon, who took part in the challenge, explains how combining GSM, satellite telemetry, geofencing, and API-driven automation, the deployment demonstrated how modern fleet platforms can maintain resilient, real-time…

Read at IoT Insider

IoT Insider Saloni Gankar

Securing AI systems in industry: why semiconductors matter more than ever

As industrial AI agents move closer to real time operational control, semiconductor vendors are becoming central to securing the next generation of factory and infrastructure systems. Omdia analysts examine how Edge AI, hardware security, and emerging regulation are reshaping industrial automation. Industrial companies are increasingly using AI systems to monitor, analyse, and even control physical…

Read at IoT Insider

IoT Insider Eleanor Hecks

What role does IoT play in the power industry’s energy transition?

The energy transition is driving the global shift from fossil fuels to renewable power sources. It represents a change in how electricity is generated and delivered, since solar farms and wind turbines now feed the grid from more locations than traditional power stations did. Network operators therefore need to see and respond to conditions across…

Read at IoT Insider

IoT Insider Paige Hookway

Connecting the unreachable: satellite connectivity in action

In a recent IoT Insider webinar, Globalstar‘s Martin Jefferson and Global Telesat Communications‘ David Phipps explained why satellite is no longer a last resort for remote assets, and why it is becoming a core layer of a resilient, hybrid IoT strategy. We’re often told we live in an increasingly connected world. For organisations managing assets…

Read at IoT Insider

IoT Insider News Desk

Canberra to add 16,000 connected streetlights to smart city network

Canberra is planning to upgrade a further 16,000 streetlights with smart lighting technology from Itron, expanding its connected lighting network to more than 47,000 assets. The ACT Government’s City and Environment Directorate (CED) is extending its collaboration with Itron and delivery partner Omexom following seven years of operating the city’s smart lighting infrastructure. The planned…

Read at IoT Insider

IoT Insider News Desk

Nordic targets battery-powered IoT with new Wi-Fi and Edge AI chip

Nordic Semiconductor has launched a new wireless system-on-chip (SoC) designed to bring Wi-Fi and edge AI to battery-powered IoT devices, claiming up to 20 times lower standby power consumption than its previous-generation Wi-Fi products. The nRF71 Series combines Wi-Fi, Bluetooth Low Energy (LE), Thread and on-device AI on a single chip, targeting applications in smart…

Read at IoT Insider

IoT Insider News Desk

DigiKey adds over 27,000 new parts and 93 suppliers to in-stock product lineup in Q3 2026

DigiKey has announced that in Q3 2026 it introduced more than 27,000 new products. Additionally, more than 507,000 new products were added to the DigiKey website, along with 93 new manufacturer suppliers. “DigiKey’s strong inventory pipeline and in-stock availability continue to drive our record-breaking growth in revenue and customer count,” said Mike Slater, Vice President…

Read at IoT Insider

IoT Insider News Desk

Ceva AI processors enter production in Mobilint Edge AI chip

Ceva’s NeuPro-Nano neural processing unit (NPU) has entered its first production deployment, forming part of Mobilint’s REGULUS Edge AI system-on-chip (SoC), designed for real-time processing in power-constrained devices. The REGULUS SoC combines Ceva’s NeuPro-Nano NPU and SensPro AI digital signal processor (DSP) with Mobilint’s proprietary AI processing architecture. The multi-engine design is intended to distribute…

Read at IoT Insider

IoT Insider Paige Hookway

Connected scares: the IoT behind Halloween’s biggest frights

Thorpe Park’s Fright Nights is celebrating its 25th anniversary this year, running on selected nights from 2nd October to 1st November, and its headline addition is Tenement – billed as the park’s first fully immersive, pitch-black scare maze. According to Time Out, guests are given nothing but a faulty handheld light to guide them through…

Read at IoT Insider

IoT Insider News Desk

Kontron relies on NOFFZ for the automated testing of its 5G communication modules

Kontron develops and manufactures 5G communication modules ‘Made in Germany’. For automated testing and quality assurance in series production, Kontron is collaborating with NOFFZ Technologies as part of a technology partnership. From 10-13th November, both companies will be presenting their solutions at electronica 2026 in Munich. Kontron is the only provider worldwide to develop 5G…

Read at IoT Insider

IoT Insider News Desk

Nordic Semiconductor proves Bluetooth HDT feature in silicon

Nordic Semiconductor has proven the upcoming Bluetooth High Data Throughput (HDT) feature in silicon through its video demonstration. Nordic is one of the first vendors to showcase support for Bluetooth HDT. With support for longer packets, Bluetooth HDT will let wearables, smart home devices, PC accessories, hearing aids, and other Bluetooth Low Energy (LE) products…

Read at IoT Insider

IoT Insider News Desk

Renesas expands RL78 family for smart appliance system control

Renesas Electronics has announced the RL78/G21, a new member of its RL78 family. Optimised for smart system control, the new MCU product series RL78/G21 combines a low-power design with optimised peripheral functions enabling both energy savings and lower costs in system-control applications such as air conditioners, refrigerators, washing machines, and microwave ovens. Renesas also expanded…

Read at IoT Insider

IoT Insider News Desk

DigiKey to showcase the Destination DigiKey experience at electronica 2026

DigiKey invites attendees to visit its booth, C5.401, at electronica Munich, 10-13th November 2026. At this year’s event, DigiKey will showcase new products from suppliers, highlight its continued growth across Europe, demonstrate technical tools and digital resources, and deliver an immersive booth experience designed to connect engineers, designers, and procurement professionals with the latest technologies…

Read at IoT Insider

IoT Insider News Desk

u-blox to showcase industry firsts at electronica ‘26

u-blox has announced its new product lineup to be premiered at electronica 2026. Tackling some of the most pressing challenges facing developers today, u-blox will showcase: how high-precision GNSS timing lays the foundations for the next generation of critical infrastructure projects; how the world’s smallest GNSS smart antenna can fulfil the demand for more reliable,…

Read at IoT Insider

IoT Insider News Desk

AI turns wearables into PAs as privacy concerns intensify

A wave of AI-powered wearables is turning body-worn devices into personal assistants just as concerns mount over how much they can see, hear and know, according to intelligence and productivity platform GlobalData. GlobalData’s latest report ‘AI is Moving Wearables from Personal Tracking to Personal Assistance, Raising the Stakes for Privacy,’ examines how AI is redefining…

Read at IoT Insider

IoT Insider News Desk

Helping embedded designers prepare for the Cyber Resilience Act

Mouser Electronics has announced a new e-book in collaboration with Microchip Technology: Designing for the Cyber Resilience Act: Securing Connected Devices from First Schematic to Final Decommissioning. As connected products become more widely used across industrial, consumer, infrastructure, and IoT applications, cybersecurity must be addressed throughout the product lifecycle. From December 2027, products with digital…

Read at IoT Insider

IoT Insider News Desk

Ookla analysis highlights the decisive role of travel eSIM routing

Ubigi, Transatel’s global eSIM connectivity service, part of the NTT Group, highlights a key finding from Ookla’s latest analysis of travel eSIMs: connecting to the same local mobile network does not necessarily deliver the same experience. Once a signal is established, the route data takes to reach its Internet breakout point can significantly affect latency…

Read at IoT Insider

IoT Insider News Desk

STMicroelectronics simplifies authentication of Matter smart home devices

STMicroelectronics has launched the ST MatterConnect service for securely loading authentication credentials into secure chips used in Matter-compatible smart home devices. The service provides a convenient, turnkey solution to store authentication data into ST25DA-C NFC and the STSAFE-A120 secure elements. Thanks to its security infrastructure and certified secure factories, ST is uniquely positioned to generate…

Read at IoT Insider

IoT Insider News Desk

Evaluation of Wi-Fi 8 and Bluetooth LE devices on a single test platform

Anritsu has developed and launched new RF characteristics evaluation options for the next-generation WLAN standard Wi-Fi 8 (IEEE 802.11bn) and Bluetooth Low Energy (LE) for its Wireless Connectivity Test Set MT8862A. The single-platform evaluation of RF characteristics for both wireless technologies helps improve development efficiency and optimising test environments. Anritsu continues to evolve its measurement…

Read at IoT Insider

Older stories