Journal articles (OpenAlex)

Recent stories from Journal articles (OpenAlex).

Tech and Pols can't read this feed right now, so these stories may be out of date. For the newest stories, go to Journal articles (OpenAlex).

Journal articles (OpenAlex) Simon Dawson, Janet Hopkins, Richard Barnett et al. · IMAPSource Proceedings

Plasma Dicing Innovations on Film Frame Carriers for High-Bandwidth Memory (HBM) and Heterogeneous Integration Devices

The rapid adoption of AI and high-bandwidth memory (HBM) is increasing the demands on die thinning, singulation quality, and hybrid bonding readiness. This paper demonstrates an integrated digital lithography and plasma dicing process on film frame carriers (FFCs) for advanced packaging and HBM applications. The flow combines spray-coated photoresist, maskless exposure, oxide and silicon plasma etching, and plasma resist stripping to enable precise 8 μm dicing streets on…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Matt Heidel, Jeb H. Flemming, Kyle McWethy et al. · IMAPSource Proceedings

Microfluidic Cooling Integrated into Glass Substrates

In this work, 3D Glass Solutions (3DGS) presents an advanced glass-based interposer architecture with embedded single-phase liquid cooling. This combined interposer architecture possesses all the standard building blocks of a typical interposer package, including: top-side flip chip IC, multiple layer electrical redistribution, through glass vias for digital and RF (50Ω) I/Os, and bottom-side BGA for PCB assembly. In addition to these interposer features, the substrate…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Adeel Ahmad Bajwa, Anton Turpault, Frank Wang et al. · IMAPSource Proceedings

A Combined Atmospheric Argon Plasma and In-Situ Formic Acid Vapor Fluxless TCB Process for Advanced Packaging

This work investigates the fundamental interactions of both formic acid (FA) vapor and atmospheric plasma with Sn metal and its oxides (SnO and SnO₂) and compares their performance in fluxless TCB. Plasma-only processing was found to risk void formation and incomplete oxide removal due to its highly directional nature and sensitivity to exposure conditions. Prior work has shown that FA-related contamination strongly depends on initial oxide thickness, with thick SnO₂ layers…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ryosuke Yamazaki, Hsiang Chuan Chen, Joseph R. Sootsman et al. · IMAPSource Proceedings

Multifunctional Silicone Hotmelt Materials Integrating Stress Relaxation and Thermal Management for Advanced Electronic

Advanced electronic packaging technologies, including wafer-level packaging (WLP) and panel-level packaging (PLP), increasingly require thinner and larger substrates to support high-throughput manufacturing. At the same time, flexible and foldable electronic devices are rapidly emerging, further increasing the demand for encapsulant and adhesive materials with both high mechanical compliance and effective thermal stress management. Conventional organic-based materials, such…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sheng Hung Chou, Sze Pei Lim, Chun Wei Yang · IMAPSource Proceedings

Material Solutions for AI/HPC Packaging from Wafer Bumping to System Assembly

Artificial intelligence (AI) has become a major driving force for advanced semiconductor packaging technologies used in high-performance computing (HPC). Unlike traditional single-chip designs, advanced packaging such as chip on wafer on substrate (CoWoS) allows for heterogeneous integration, combining system on a chip (SoC), graphics processing units (GPUs), and high bandwidth memory (HBM) memory stacks into a single package. However, due to increased package complexity and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sasi Kumar Tippabhotla, Ji Lin, Tai-Chong Chai · IMAPSource Proceedings

Towards a Digital Twin for Failure Risk Prediction of Epoxy Mold Compounds and Warpage Modeling in Advanced Packaging

In this work we present a predictive simulation model for epoxy mold compound (EMC), based-on advanced material characterization and inelastic material modelling. Tensile testing at different temperatures and loading rates was conducted to characterize the plasticity, creep and stress relaxation behaviors of the EMC material. Experimentally observed plasticity and creep behaviors are incorporated in the inelastic (viscoplastic) material model. A linear viscoelastic (LVE)…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kanji Matsumoto, Tomoharu Nakayama, Shinichiro Yoshida et al. · IMAPSource Proceedings

The Effect of Ni Content in Electroless Cu Deposit on the Adhesion Between the Seed Layer and Glass Substrate

In this paper, we discuss a method of improving the adhesion of the seed layer, consisting of a metal oxide deposit and electroless copper film, on the glass substrate. The rapid development of AI technology has dramatically increased the demand for High-Performance Computing (HPC), which requires the processing of massive datasets at extremely high speeds. To achieve high-performance processing for use in HPC, more chiplets should be mounted on a single substrate. As a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Junlong Wang · Applied and Computational Engineering

A Study on Performance Comparison and Application Scenarios of PVD, CVD and ALD Thin-Film Deposition Processes

Semiconductor thin films are the core functional structures of microelectronic and optoelectronic devices. The thickness, uniformity, and density of the thin film directly determine the performance, lifespan, and stability of the device. With the continuous miniaturization and three-dimensionalization of semiconductor devices, traditional deposition processes are struggling to meet the high-precision coating requirements of high aspect ratio micro/nano structures. Therefore…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) L. Böttcher, David Schütze, Thomas Löher et al. · IMAPSource Proceedings

Advanced Embedding Technologies for High Performance SiC Power Modules in Automotive Applications

The ongoing transition towards electrified powertrains places increasing demands on power module performance, reliability, and scalability. Automotive traction inverter applications based on silicon carbide (SiC) MOSFETs require advanced packaging solutions capable of supporting high power density, low parasitic inductance, and efficient thermal management. Conventional module concepts are increasingly challenged by the fast switching behavior of SiC devices and the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Oliver M. ‐R. Chyan, Kevin Antony Jesu Durai, Khanh Tuyet Anh Tran et al. · IMAPSource Proceedings

Enabling Low-Temperature Cu-to-Cu Direct Bonding via Nanocrystalline Cu and Cu-Selective Oxide Suppression Coating

The rapid advancement of artificial intelligence (AI), high-performance computing (HPC), and data-centric technologies is driving demand for interconnects with ultra-high density, low resistance, and superior reliability. While Cu-to-Cu direct bonding offers significant advantages over conventional Cu-to-solder interconnects, including ultra-fine pitch capability, lower electrical resistance, and improved thermal performance, its widespread adoption remains limited by the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Chongyang Cai, Liu Jiang, El Mehdi Bazizi · IMAPSource Proceedings

Characterizing the Impact of In-Plane Deformation in Die-to-Wafer Hybrid Bonding from Die Warpage and Bonder Shape Effects

The increasing demand for high-performance computing and artificial intelligence is accelerating the adoption of advanced packaging technologies capable of supporting a higher number of interconnects with reduced pitch. Die-to-wafer (D2W) hybrid bonding has emerged as an important enabler for next-generation heterogeneous integration because it provides high-density interconnects with superior electrical performance. However, the process also introduces critical overlay…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tailong Shi, Qi Li, Hongfei Chen et al. · Micromachines

A Comparative Study of Parylene, PSPI and ALD TiO2/TiN/Ru/Cu Multilayer as Adhesion Layers on Glass Surface for Glass-Cu Adhesion Enhancement

Glass substrates exhibit great potential in 2.5D/3D advanced packaging, but poor interfacial adhesion with metal layers remains a critical challenge. This work studies three different adhesion layer strategies, namely Parylene-C, photosensitive polyimide (PSPI), and atomic layer deposition (ALD) TiO2/TiN/Ru/Cu multilayer, to improve glass-Cu adhesion. A 30 µm Cu layer was electroplated over glass-Parylene-Ti/Cu, glass-PSPI-Ti/Cu, and glass-TiO2/TiN/Ru/Cu multilayer stacks…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Venkat Rao Pasupuleti, Karaka Tejasri, Vishni Teja et al. · Engineering Research Express

Physics-informed Graph-ResNet for real-time VLSI wirelength prediction with HPC enabled data

Abstract In very large scale integration physical design, accurate pre-routing wirelength prediction is a crucial bottleneck. Graph neural networks (GNNs) attain excellent accuracy but have seconds of inference latency, which prevents real-time application inside placement loops, whereas analytical heuristics diverge under congestion. To address these limitations, this paper presents a complete framework based on a proposed Physics-Informed Graph-ResNet. First, we create a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tailong Shi, Lihong Chen, Qi Li et al. · Micromachines

A Review of Research Progresses in Through-Glass Via (TGV) Metallization

Through-glass vias (TGVs), as key vertical interconnect structures in 2.5-D/3-D advanced packaging, offer low dielectric loss, low parasitic capacitance, and excellent high-frequency transmission performance. However, several challenges remain in TGV metallization, including (1) incontinuity of seed layers in high aspect ratio TGVs; (2) non-uniform distributions of copper-ion concentration and current density, leading to significant differences in copper deposition rates…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Seungho Lee, Seungchan Lee, Jiwon Kim et al. · Journal of Micro/Nanopatterning Materials and Metrology

Impact of mask absorber geometry on imaging stability in extreme-ultraviolet lithography with high numerical aperture

Extreme-ultraviolet lithography (EUVL) mask absorber patterns inherently form trapezoidal cross-sectional profiles, characterized by a sidewall angle (SWA), because of process limitations. However, this feature has often been considered a fabrication imperfection rather than an optical design parameter. To assess process tolerance, we systematically investigate how the geometric profile and optical constants of mask absorbers influence imaging performance in next-generation…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yi-Jen Huang, Amir Reza Ansari Dezfoli, Melika Chaji et al. · The International Journal of Advanced Manufacturing Technology

Flow modification and oxygen redistribution in Magnetic Czochralski silicon growth: a 3D transient simulation with experimental validation

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jungwoo Ahn, Jihoon Bae, Hyojin Ahn et al. · Systems

Schedule-Informed Empty-Vehicle Dispatching for OHT Systems in Semiconductor Manufacturing

Overhead hoist transport (OHT) performance affects the execution of semiconductor production schedules because transport delays postpone subsequent operations. This study develops the Scheduler and OHT Allocation Monitoring Simulator (SOMOS), an event-driven environment that integrates machine processing, transport request generation, OHT movement, and subsequent production execution. Based on SOMOS, we propose Schedule-informed Empty-Vehicle Dispatching (SEVD), which…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jeongsik Kim, Jinmo Kim, Cheolhong Park et al. · Journal of Micro/Nanopatterning Materials and Metrology

Recessing material and process for improving contact hole patterns for high-NA and hyper-NA EUV lithography

In high-NA and hyper-NA EUV lithography, the reduced depth of focus (DOF) necessitates the use of thin resist films. However, increasing the resist thickness is advantageous for improving the local critical dimension uniformity (LCDU) of contact-hole patterns. This creates an inherent trade-off between LCDU improvement during exposure and DOF control in the final resist pattern. To address this challenge, we propose a new material and process scheme in which the resist is…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Danilo D. Simone · Journal of Micro/Nanopatterning Materials and Metrology

Technology readiness of PFAS-free lithography materials: an anonymized survey of resist and ancillary material maturity

BackgroundPer- and polyfluoroalkyl substances (PFASs) are widely used in lithography materials because of their unique chemical and surface properties, but their extreme environmental persistence and toxicity drive increasing regulatory and sustainability pressure to eliminate their use. Substantial efforts are therefore underway to develop PFAS-free alternatives for photoresists and associated lithography materials across deep ultraviolet and extreme ultraviolet (EUV)…

Read at Journal articles (OpenAlex)