Journal articles (OpenAlex)

Recent stories from Journal articles (OpenAlex).

Tech and Pols can't read this feed right now, so these stories may be out of date. For the newest stories, go to Journal articles (OpenAlex).

Journal articles (OpenAlex) Jiale Tang, Zi Wang, HOU Yuanlang et al. · Materials

Applications of Directed Self-Assembly Lithography in Advanced Semiconductor Devices

As semiconductor devices continue to scale down, conventional lithography technologies face increasingly severe challenges in resolution, stochastic defect control, and manufacturing cost. Block copolymer (BCP) directed self-assembly (DSA), which offers molecular-scale control over pattern formation and compatibility with existing lithographic processes, has emerged as a promising complementary nanopatterning technology for advanced semiconductor manufacturing. This review…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) V. Ramalingam, V. S. Lee, Yew Hoong Wong · Materialwissenschaft und Werkstofftechnik

Silane coupling agent for semiconductor manufacturing

Silane coupling agents (SCAs) have evolved from conventional adhesion promoters into multifunctional interfacial materials essential for semiconductor packaging reliability. As device miniaturization, heterogeneous integration, and advanced packaging technologies intensify interfacial challenges, SCAs increasingly contribute to moisture resistance, stress mitigation, electrical performance, and thermal stability. This review examines six decades of SCA development, from…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Fugeng Wu, Jinbing Zhang, Wentao Shao et al. · Electron

Thermally Conductive and Electrically Insulating Thermal Interface Materials for Advanced Packaging: From Filler and Interface Engineering to Thermal Networks

ABSTRACT Thermal interface materials (TIMs) that combine efficient heat transport with electrical insulation are increasingly important for three‐dimensional integration and high‐power electronic packaging. Existing reviews commonly organize the field by filler type or treat surface modification, filler alignment, and network construction as separate strategies, obscuring their coupling across length scales. Here, we present a hierarchical design framework linking physical…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Gian Francesco Lorusso, Alain Moussa, Sahel Habashieh et al. · Journal of Micro/Nanopatterning Materials and Metrology

High landing energy SEM dimensional metrology for High NA EUVL

BackgroundRecently, High Numerical Aperture Extreme Ultraviolet Lithography (High-NA EUVL) started delivering its first wafers, showing its potential by printing 18 and 16 nm pitch line/space. However, as feature sizes drop below 10 nm, questions are raised on the ability of the current metrology procedures and tools to properly characterize such small targets. In particular, it is critical to assess the impact of limited spatial resolution and identify possible ways…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Li Li, Yuyang Li, Junya Tang et al. · Autonomous Intelligent Systems

Toward autonomous decision support in semiconductor manufacturing: a review of planning, scheduling, dispatching, and execution control

Abstract Semiconductor manufacturing is a high-stakes cyber-physical production domain in which planning targets, scheduling feasibility, dispatching actions, process-control feedback, and human oversight must remain continuously aligned. This paper presents a structured state-of-the-art review of semiconductor smart manufacturing from the perspective of autonomous intelligent systems (AIS). The review does not treat planning, scheduling, dispatching, real-time dispatching…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sze Pei Lim, Jason Chou, Chun Wei Yang et al. · IMAPSource Proceedings

Novel Interconnect Materials for Advanced Packaging Assembly Processes

As advanced packaging continues to drive towards heterogeneous integration, new materials need to be developed to address the many challenges faced in the assembly process. Development of novel materials for the various assembly processes is crucial to ensuring high yield for the assembly process for reliable SiP applications, and high density, fine pitch interconnects. As ultra-fine pitch flip-chips become prevalent in advanced packaging, with reduced standoff of flip-chips…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Mohsin A. Patel, Raphael Nam, Marisol Valdez et al. · Journal of Micro/Nanopatterning Materials and Metrology

Minimizing line/space pattern defects and roughness of indium nitrate resists through environmental control

The processing environment has a significant effect on the performance of metal oxide resists (MORs). Here, we examine the effects of relative humidity (RH) and atmospheric oxygen on the morphology, chemical composition, and line/space (L/S) patterning results of indium(III) nitrate hydrate (In(NO3)3·xH2O) MORs. Previous work shows that processing In(NO3)3-based resists under ambient conditions at RH≥40% produces localized surface protrusions at the nanoscale, which disrupt…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Poonsub Threepopnatkul, Supanut Phattarateera, Natdanai Sirayanyong et al. · Key engineering materials

Effect of PLA Molecular Weight on Mechanical and Morphological Properties of PVA/PLA Biomaterial Blown Films

This study investigates the influences of polylactic acid (PLA) molecular weight on mechanical behaviors and morphological property of polyvinyl alcohol (PVA)/PLA biomaterial blown films. Three commercial PLAs (L105, L130, and L175) with distinct molecular weights are individually blended with PVA at a fixed ratio of 50 wt%. Glycerol (20 phr) is employed as a plasticizer to enhance film processability. Films are fabricated via twin-screw extrusion followed by film blowing…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jungrae Park, Joshua Peck, Joshua S. Hooge et al. · IMAPSource Proceedings

Low Thermal Damage Laser Lift-off (LLO) Enabling Multi-Cycle Carrier Wafers Reuse for Advanced Packaging

Fusion and hybrid bonding are becoming critical enablers in advanced packaging for die-to-wafer (D2W), high-bandwidth memory (HBM), and artificial intelligence (AI) applications. Laser lift-off (LLO) employing short-pulsed IR laser beam provides a clean and efficient method to release permanently bonded Si carrier wafers without need of a glue layer or backside grinding processes. LLO enables multiple carrier wafer reuse cycles, offering significant cost reduction and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Antika Roy, Pratyush Shukla, Junfu Cheng et al. · IMAPSource Proceedings

INSIGHT-X: Multimodal VLM Assistant for Artifact Localization, and Mitigation Guidance in X-ray Inspection

Advanced semiconductor packages rely on X-ray CT and laminography for non-destructive inspection of buried interconnects and internal structures. However, dense metal features and heterogeneous materials often introduce artifacts, including ring artifacts, beam-hardening streaks, geometric distortions, and missing-cone artifacts. These artifacts obscure critical features during inspection, reduce reconstruction fidelity, and complicate defect interpretation, requiring…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jundi Yuan, Peng Lian, Jinping Chen et al. · Journal of Micro/Nanopatterning Materials and Metrology

Fluorination enhanced lithographic performance of sulfonium-based molecular nonchemically-amplified resist

BackgroundNonchemically amplified resists (n-CARs) have emerged as a promising candidate for the next-generation of resists. Sulfonium-based n-CARs exhibit the capability of forming patterns with high resolution and low LER. However, their practical application is severely hindered by the low sensitivity.AimIt is expected to improve the sensitivity of sulfonium-based n-CARs by enhancing the absorption of extreme ultraviolet (EUV) or electron irradiation, thereby increasing…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Robert L. Bristol · Journal of Micro/Nanopatterning Materials and Metrology

Closing the stochastic resolution gap

BackgroundSince the birth of the integrated circuit, electronics industry growth and innovation have relied on semiconductor manufacturers putting ever smaller features (described by their critical dimensions or CDs) into production. Yet today, stochastics, the randomness inherent to chip making near the atomic scale, is threatening the continued ability to manufacture the smallest possible features in volume production.AimTo understand the impact of stochastics on…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Robert Bishop, Tim Pinkney · IMAPSource Proceedings

Substrate Yield Enhancement Enabled by Advanced Packaging Metrology System

Detecting dimensional errors in substrate fabrication induced by the manufacturing process is a challenge for high-density substrates. Such detection is especially important in advanced substrates that incorporate high-speed impedance-controlled circuits where a small change in linewidth and spacing can impact circuit performance. A 100% metrology inspection system has been developed that can detect these dimensional errors and provide the data needed to correct these…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kyuhwan Kim, Ju-Young Kim, Song‐Se Yi et al. · Journal of Micro/Nanopatterning Materials and Metrology

Balancing DOF margin and stochastic failure in high-NA EUV process

BackgroundHigh-numerical aperture (NA) extreme ultraviolet (EUV) lithography delivers superior resolution, but it severely restricts the depth of focus (DOF) window. To expand this margin, the detrimental impact of stray photons leaking into unexposed areas must be mitigated. Crucially, we confirmed that increasing the photo contrast to decrease stochastic failure conversely increases sensitivity to this leakage light, thereby degrading the DOF margin.AimWe aim to maximize…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Taehyeok Seo, Jongik Chung, Ilsuk Kang · International Journal of Production Research

Robust process diagnosis using explainable CNNs for highly imbalanced wafer map defect classification in semiconductor manufacturing

Wafer defect pattern classification is essential for yield optimisation in semiconductor manufacturing. However, many existing studies evaluate models under modified class distributions or simplified experimental settings, providing limited evidence of deployment reliability under the severe imbalance observed in production data. This study presents a reproducible CNN-based evaluation framework using all 172,950 labelled samples in the WM-811K dataset, including the dominant…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Mohammad Taghi Mohammadi Anaei, Nicholas May, José Rodrigo Delgadillo Blando et al. · IMAPSource Proceedings

Metrology-Driven Sample Preparation for Advanced Microelectronics Using TESCAN FemtoChisel with Intelligent Multigas Processing, LPL, and AI-Enabled Correlative Workflows

Advanced microelectronics metrology increasingly depends on how the sample is prepared before inspection. In heterogeneous packages, the region of interest may be buried beneath combinations of mold compound, silicon, copper, redistribution layers, dielectrics, underfill, and organic substrate materials. The measurement challenge is therefore not only one of imaging resolution, but also one of physical access: the sample must be opened to the correct level, the exposed…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Xin Song, Shanqi Zhou, Daofang Chang · Measurement Science and Technology

Conformal prediction under cross-period exchangeability breakdown: a causal-admissibility M&V cascade for LNG receiving terminals

Abstract Liquefied natural gas (LNG) receiving terminals require measurement and verification baselines that support energy-performance assessment under the IPMVP and ISO 50006 frameworks. Post-hoc interpretability methods explain a fitted model but do not themselves document an independent pre-fit input review. This paper develops a six-stage cascade with a separate pre-fit review. A pre-prediction Causal Admissibility Screening audit decides admissibility from the raw data…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Aric Shorey, Chris Keimel, John Mookken et al. · IMAPSource Proceedings

The Ideal Switch®: Glass-based Device With Demonstrated Reliability

Menlo Microsystems Inc. (Menlo Micro) has introduced a MEMS switch that utilizes both a glass substrate and a glass cap with through glass via (TGV) technology to provide an all-glass packaging solution. The MEMS switch technology combined with an all- glass packaging solution, has resulted in the Ideal Switch®. It is the world’s smallest, most reliable, and efficient micro-mechanical switch that can be used for numerous RF and power applications. The Ideal Switch® gains…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ksenija Varga, Lisa Berger, Tobias Zenger et al. · IMAPSource Proceedings

Copper Pillar Patterning Using Digital Exposure Technology with Dry Film Resists for 2.5D PLP

Fan-out panel-level packaging (FO-PLP) is a growing segment in heterogeneous integration, gaining importance as a cost-efficient solution for advanced packaging. Panel formats of 310×310 mm² demonstrate technical advantages over wafer substrates while avoiding the process complexities associated with larger panel sizes. In this work, a novel dry film resist (DFR) was patterned using digital exposure lithography for high aspect ratio (high A.R.) Copper pillar (Cu pillar)…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Wenqing Xiong, Mingyao Li, Chunrong Pan et al. · International Journal of Production Research

Efficient approach for start-up transient process optimisation of cluster tools with equipment front-end module

In semiconductor manufacturing, cluster tools with equipment front-end modules (EFEM) play a critical role in wafer fabrication. The rapid growth of AI has sharply increased the demand for high-performance computing chips. As a result, the rapid increase in wafer processing lots has led to frequent switches between steady state and transient processes in cluster tools, which reduces tool efficiency and makes start-up process scheduling increasingly important. This work aims…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Aaron Chen, Lawrence Der · IMAPSource Proceedings

Accelerating Advanced Packaging and Interposer Design with AI-Based 3D Full-Wave Optimization

The rapid evolution of microelectronic technologies has led to increasingly compact, high density package designs that must accommodate for multiple high-speed die-to-die interconnects. With modern high-speed package deigns becoming increasingly complex, this presents a significant challenge in achieving the optimal path planning to maintain routing and signal integrity. This paper explores an advanced methodology of how Artificial Intelligence (AI) is being leveraged to…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tianyin Chena, Alessio Mirandaa, Leyla Ramia et al. · Diamond and Related Materials

Plasma etch process optimization for photonic-grade diamond-on-insulator substrates and thickness evaluation using colorimetry

Diamond qubits integrated with photonic circuits can be initialized, manipulated, entangled, and read out individually with high fidelity, making them attractive for large-scale quantum systems. However, the limited size of heteroepitaxially grown single-crystal diamond and photonic-grade diamond-on-insulator (DOI) remains challenging for integration with existing manufacturing processes. Here, we develop a plasma etch recipe to thin direct-bonded (100) single-crystal…

Read at Journal articles (OpenAlex)

Older stories