Journal articles (OpenAlex)

Recent stories from Journal articles (OpenAlex).

Tech and Pols can't read this feed right now, so these stories may be out of date. For the newest stories, go to Journal articles (OpenAlex).

Journal articles (OpenAlex) Sivakumar Selvarasu, C. G Abraham, S. Madhukumar et al. · Journal of Circuits Systems and Computers

A Near Threshold SRAM Compute-in-Memory Transformer Accelerator with Adaptive Precision Scaling for Sub mW Edge AI Applications

The increasing trend towards the adoption of transformers in edge devices stipulates the need for ultralow power devices that also require high energy efficiency with power budget constraints. This article proposes a near-threshold SRAM compute-in-memory transformer accelerator with adaptive precision scaling for sub-mW edge AI applications. The architecture performs MAC operations directly inside a modified 6T SRAM cell, minimizing data movement between compute and memory…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Marie-Louise Lackner, Francesca Da Ros, Nysret Musliu · Journal of Scheduling

Theoretical lower bounds for a parallel batch scheduling problem

Abstract The Oven Scheduling Problem (OSP) is an NP-hard real-world parallel batch scheduling problem arising in the semiconductor industry. Its objective is to schedule a set of jobs on ovens while minimizing total oven runtime, job tardiness, and setup costs. At the same time, it must adhere to various constraints such as oven eligibility and availability, job release dates, setup times between batches, and oven capacity limitations. In this paper, we develop theoretical…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Amelia Hasenauer, Kristian Ivkovic, Samuel Thalmann et al. · Biofabrication

In-chip volumetric printing of perfusable and stretchable collagen-I scaffolds for mammary tissue models

Engineered epithelial models require three-dimensional extracellular matrix environments that support organized cell growth and allow independent access to luminal and basal compartments.However, many organ-on-chip (OoC) fabrication strategies rely on planar geometries, nonnative materials, or multi-step assembly workflows that limit architectural complexity and experimental control. Here, we report a direct in-chip volumetric printing strategy for fabricating stretchable…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Eric M. M. Tan, Priyanka Proost, Patrick Dekort et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Bridging the Gaps to Achieve Ultra-Clean Processing and Surface Preparation of Germanium Wafers

Germanium has re-emerged as an important material for optoelectronic, photonic, and space photovoltaic applications because it combines high carrier mobility, favorable optical properties, and radiation tolerance with an important role in multi-junction solar cells that achieve high power conversion efficiency. However, the integration of germanium wafers into silicon CMOS foundries requires ultra-clean surfaces and remains challenging because standard silicon-oriented…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) E. Deloffre, A. Girardon, Sébastien Mermoz et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Surface Preparation Challenges for Direct Bonding in 3D Integration

The relentless advancement of microelectronics, historically driven by Moore’s Law, faces increasing challenges as device scaling approaches fundamental physical and economic limits. To overcome these constraints, the semiconductor industry has adopted the "More than Moore" approach, emphasizing heterogeneous integration of diverse functionalities within compact 3D architectures. Central to this evolution, bonding techniques, particularly direct and hybrid bonding, enable…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tawfique Hasan · Advanced Photonics

Better than ourselves: a conversation with Roel Baets

Roel Baets helped turn silicon photonics from scientific curiosity into industrial platform, then built the foundry access, education, and spin-off ecosystem that let the field flourish. The Ghent University emeritus talks to Advanced Photonics about showstoppers, supply chains, and why his group never wanted to be the best. Watch the full interview at https://doi.org/10.1117/1.AP.8.5.050503.

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) P. Garnier, Hugo Galbes · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Nonvisible Material Degradation by Physical Cleaning

The semiconductor industry relies heavily on physical cleaning processes such as high-velocity sprays to remove particles from wafer surfaces. Although these methods effectively detach particles, they can also induce subsurface damage, particularly nanoscale cracks that remain undetectable by conventional inspection techniques. This study presents a comprehensive investigation into the mechanisms behind barely visible material degradation caused by physical cleaning sprays…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Meisam Abdollahi, S. Faegheh Yeganli, Amirali Baniasadi · Photonics

A Scoping Review on Intelligent Computing upon Silicon Photonics and Optical Network on Chips

The continuous expansion of data-intensive applications, including deep learning, autonomous control, and real-time analytics, has pushed conventional electronic computing toward its limits in performance and energy efficiency. Combining silicon photonics with Optical Network on Chip (ONoC) provides a pathway toward high-bandwidth and low-latency communication with reduced power consumption, positioning these technologies as promising enablers for next-generation intelligent…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Lina Qu, Lirong Yan, Jieru Chen et al. · International Review of Economics & Finance

Impact of US Entity List sanctions on Chinese firms’ export resilience: Evidence from intermediate import shocks

United States (US) Entity List sanctions against China have exposed Chinese firms to intermediate input supply shocks in the global supply chain, threatening the security and stability of China’s industrial and supply chains. Based on matched data of Chinese listed firms and the China Customs Trade database, this study employs a fixed effects model to investigate how US Entity List sanctions affect Chinese firms’ export resilience through intermediate goods imports. The…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) L. Böttcher, Ruben Kahle, Andreas Ostmann · IMAPSource Proceedings

High Density Interconnect Scaling Beyond Organic Substrates Using Glass Cores

The rapidly increasing performance demands of chiplet based AI computing systems require advanced substrate technologies capable of supporting extremely high interconnect densities, low electrical losses, compact form factors, and reliable power delivery. Conventional organic core substrates, while mature and widely used, encounter fundamental geometric, electrical, and dimensional stability limitations when scaled to fine pitch interconnects in the single digit micrometer…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Inosh Perera, Scott Brossman, Diana Aranzales et al. · IMAPSource Proceedings

Enabling High-Density Power Packaging: Bridge and Fill for Through-Hole Filling in Advanced IC Substrate Core

Through-hole (TH) filling technology has emerged as a pivotal component in high-performance integrated circuit (IC) packaging, effectively addressing the electrical and thermal challenges posed by advanced applications such as artificial intelligence (AI), high-performance computing (HPC), and data center servers. AI accelerators and HPC modules are driving unprecedented increases in power density, with leading-edge AI devices exceeding 1 kW per package, and server…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Alan Lewis, Zubin Trivedi, Leonid Braun et al. · IMAPSource Proceedings

Digital Twin–Ready Underfill Simulation with High-Speed CFD

The rapid adoption of chiplet‑based packaging architectures has significantly increased the number of new package designs reaching production (tape‑out), driving demand for faster, more flexible backend process development. Underfill process optimization, already time‑consuming and costly for single‑die packages, becomes substantially more complex for multi‑die and heterogeneous chiplet designs due to intricate geometries, dense bump patterns, and tight process windows…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zijie Deng · Applied and Computational Engineering

Opportunities and Limitations of AI Technology Empowering Chip Design

As semiconductor manufacturing processes approach physical limits, the complexity and R&D costs of chip design continue to rise, highlighting the efficiency bottlenecks of traditional design methodologies. The rapid advancement of artificial intelligence (AI) has introduced novel solutions to chip design, emerging as a core focus of the industry. This paper takes the integrated application of AI and chip design as the research subject, and systematically sorts out AI…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Oliver M. ‐R. Chyan, Shyam Muralidharan Nair, Duwage Anushka Sandaruwan Perera et al. · IMAPSource Proceedings

Sustainable Ambient-Air Cu-Cu Wedge Bonding via Cu-Selective Ultrathin Passivation

Despite advances in 2.5D and 3D packaging, wire bonding remains the most widely used interconnection method in the semiconductor industry. Direct copper-to-copper (Cu-Cu) wedge bonding is highly valued in IC packaging due to its excellent electrical and thermal properties and lower material cost compared to gold (Au). However, its industrial use is limited because bare Cu surfaces oxidize rapidly at typical assembly temperatures (198-200 °C), forming a native Cu oxide…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tindara Verduci, Arjun Wadhwa, Ruud de Wit · IMAPSource Proceedings

Advancing Panel-Level Fan-Out Technologies for High-Frequency and Power Devices through Alternative Through-Package Interconnects

Future communication, radar, and power management systems require semiconductor components that deliver higher performance, smaller footprints, and lower manufacturing costs. The ongoing transition within the semiconductor industry from wire and clip bonding and wafer-level packaging toward fan-out panel-level packaging (FOPLP) is largely driven by these requirements and by the improved area utilization offered by panel-level manufacturing compared with the maximum 300mm…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Guillem Colom Piella · European Security

When arms embargoes become procurement problems: Spain, Israel and normative decoupling in defence acquisition

Arms embargoes are usually analysed as foreign-policy decisions or export-control instruments. This article argues that, when the targeted state is also embedded in the sanctioning state's defence acquisition system, an embargo becomes a domestic procurement-governance problem. It develops the concept of normative decoupling: the attempt to reduce, suspend or terminate dependencies on a politically or legally unacceptable supplier while preserving military capability…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Shengwei You, Andrey Kuehlkamp, Aditya Joshi et al. · Blockchains

Breaking the Peg, or Not: The Limited Power of Oracle Manipulation Against Early Stablecoin Depeg Prediction

A common worry about depeg predictors is that an adversary who manipulates oracle prices can blind them. We test it on a new multi-source corpus of twelve historical stress episodes across nine assets and three chains. Under retrospective leave-one-event-out testing, the reconstructed models span 0.558–0.772 ROC-AUC, with our reference predictor at 0.762; the source papers report different metrics and tasks that are not directly comparable. Manipulable price features hurt…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Na-Hyeon Cho, Min-Jung Kim, Yookyung Jeong et al. · Sustainability

Comparison of Batch and Column Leaching Conditions for the Environmental Assessment of Waste Foundry Sands Intended for Media Contact Recycling

Driven by the global sand crisis, waste foundry sand (WFS) is increasingly valorized as an alternative aggregate, which makes evaluating its ecological safety important. Regulatory approval usually rests on a single leaching test, which may not represent the range of conditions to which WFS can be exposed. Here, 17 WFS samples were evaluated using three standardized batch tests—neutral water (KLT), an organic acid fluid (TCLP) and an inorganic acid fluid (SPLP)—and an…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Suruchi Bala, Hodjat Hajian, Alex S. Clark et al. · IEEE photonics journal

Performance and Yield Analysis of Distributed Bragg Reflectors on Foundry-Based Deep UV SOI Chips

Silicon waveguide distributed Bragg reflectors (DBRs) were designed and fabricated using a 248 nm Deep Ultra-Violet (UV) projection lithography process within a photonic foundry platform. The influence of key structural parameters, including grating period, fill factor, number of periods, and corrugation width, on the spectral response of the device was systematically investigated. The measured Bragg wavelength, extinction ratio, and 3 dB bandwidth were statistically…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Héctor López Nicolás, J. C. Ventura Castro, Gerardo Antonio Fonseca-Hernández et al. · Journal of Composite Materials

Mechanical recycling of CFRP Composites—Part I: Characterizing carbon fiber and cured epoxy as dispersed phases

This study investigates carbon-fiber fabric and cured epoxy as separate fractions to establish a baseline for the mechanical valorization of carbon fiber-reinforced polymers (CFRP). Unrecycled components were used to isolate the effects of identity, geometry, processing, and reinforcement content without the variability of CFRP recyclates. Millimeter-scale fabric fragments and cured-epoxy chips from face and peripheral milling were added to an epoxy matrix at 1–5 wt%…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zhaohui Wang, Ting Chen, Jiahui Wang et al. · Journal of King Saud University - Computer and Information Sciences

Design and implementation of a wafer-level verification system targeting 2D-mesh interconnection networks

System on Wafer (SoW), as a key technological path to break through the traditional chip area limitation and achieve a leap in computing power, has become an active research focus in the field of integrated circuits in the post-Moore era. In response to the diverse, dynamic, and high-speed communication requirements in AI and high-performance computing, building a wafer-level reconfigurable switching network has emerged as an effective solution. However, constrained by…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Seung-Kyu Kim, Ji-Hoon Kang, Jongwook Jeon et al. · JSTS Journal of Semiconductor Technology and Science

Performance Analysis on Silicon Bridge with Chessboard Patterned Interconnect

A signal integrity and routing density analysis of a chessboard patterned interconnect (CPI) structure for Si bridge-based die-to-die interconnects is presented, targeting compliance with the Universal Chiplet Interconnect express (UCIe) standard. The CPI structure is compared against conventional fully shielded (FS) S1G1 and SnG1 configurations through full-wave electromagnetic and time-domain simulations. Key electrical transmission performance metrics include…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sajjad Parvin, Chandan Kumar Jha, Paul Flammarion et al. · ACM Transactions on Design Automation of Electronic Systems

The Deception of Sight: Camouflaging Chips Information Against Optical Probing Attacks By Selective Increase of Local Density

In recent years, a novel non-invasive laser-assisted attack known as Optical Probing (OP) has been demonstrated to effectively probe the internal state of integrated circuits. This attack exploits the relative transparency of the silicon substrate to Near-InfraRed (NIR) light, enabling optical access through the backside of the chip. Consequently, OP poses a significant threat to information processed or stored on the chip and may facilitate Intellectual Property (IP) theft…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Peter Radic · Optics Express

Monolithic carrier-beam steering with milliradian precision and single-voltage control

We describe what we believe to be a new class of monolithic beam steering systems. The device operates in the conventional 1550 nm communication band and can continuously steer over a 65.2° range with milliradian precision. The reported performance rests on two distinct advances, compatible with commercial foundry processes. The device core is a nonuniform, liquid-crystal-clad Si 3 N 4 leaky grating, controlled by a single drive voltage over the entire operating range. The…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yonatan Piasetzky, Yuval Warshavsky, Haim Suchowski et al. · Optica Quantum

High-fidelity CNOT gates in photonic integrated circuits using composite segmented directional couplers

Directional couplers are fundamental building blocks for integrated quantum photonic circuits but are highly sensitive to fabrication imperfections. We demonstrate that composite segmented directional couplers (CSDCs) enhance gate fidelity without active tuning. We design and fabricate fully integrated photonic controlled-NOT (CNOT) gates using both uniform and composite coupler variants and compare their performance via simulation, classical characterization, and quantum…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Anand Raj, Pabitra Das, Amit Acharyya · ACM Journal on Emerging Technologies in Computing Systems

ORCA: Oracle-less CNN-based Structural Attack on Hardware Obfuscation and Reverse Engineering to RTL

In this paper, we propose ORCA, an oracle-less, CNN-based structural attack methodology that circumvents logic locking by predicting the key of a locked gate-level netlist and reversing it to RTL. The proposed methodology learns the features of a local gate near the root node in the obfuscated design to predict the key of the locked netlist. This methodology is evaluated on different standard benchmark suites such as ISCAS-85, ITC-99, and EPFL. ORCA predicts the key with an…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zaitian Chen, Weiran Chen, Song Chen et al. · ACM Transactions on Design Automation of Electronic Systems

AceTherm: Accelerated Thermal Analysis of Chiplet Integration Using Non-Conformal FEM

As advanced process nodes continue to scale, heterogeneous integration technologies such as 2.5D/3D packaging, chiplets, and high-bandwidth memory have been widely adopted. However, these advances introduce substantially higher power densities, more complex interconnection structures, and increasingly diverse material systems. The resulting localized hotspots raise reliability concerns such as electromigration, thermomechanical stress, and structural warpage, making…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Nathaniel Furman, Albert Herrero-Parareda, Anthony Rapp et al. · Optical Materials Express

Experimental measurement of enhanced group delay in silicon photonic waveguides indicative of the frozen mode regime around the stationary inflection point [Invited]

The dispersion engineering of periodic silicon photonic waveguides presents opportunities for significant group delay enhancement compared to uniform waveguides of comparable length. We describe the spectral response characteristics for measured devices composed by three coupled waveguides and compare their properties to modeled data. These waveguides support the frozen mode regime (FMR) around near infrared wavelengths and are expected to show enhanced group delays around…

Read at Journal articles (OpenAlex)

Older stories