Journal articles (OpenAlex)
Recent stories from Journal articles (OpenAlex).
Tech and Pols can't read this feed right now, so these stories may be out of date. For the newest stories, go to Journal articles (OpenAlex).
Room-temperature high-sensitivity hydrogen sensing using Pd/Al2O3/IGZO TFT with ultrathin ALD Al2O3 passivation-transport layer
ABSTRACT The development of room-temperature hydrogen microsensors still faces technical challenges. In this work, we report a Pd/Al 2 O 3 /IGZO thin film transistor (TFT) hydrogen sensor chip, which exhibits excellent hydrogen detection performance at room temperature. The sensor achieves a relative response of 100.2 to 1000 ppm hydrogen, a detection limit lower than 20 ppm, and a device area of 0.75 mm 2 . By inserting an ultrathin Al 2 O 3 passivation-transport layer…
Water footprint of large AI models: risks to global water security and sustainable optimization strategies
ABSTRACT Diagram linking AI model training and inference to lifecycle water use, estimated at 4.2–6.6 billion m³ annually by 2027, and showing water reuse, efficient cooling, smarter workloads, and standardized reporting as strategies to protect global water security. The rapid proliferation of large-scale artificial intelligence (AI) models has introduced a significant yet underexamined environmental challenge: freshwater consumption. This narrative review synthesizes…
Corrosion-Free Copper Pad Recess Enabled by Wet Acid Etching and Functional Water Rinse for Hybrid Bonding Applications
This study presents a novel cyclic wet etching process based on citric acid for the controlled recessing of copper (Cu) pads, aimed at improving wafer-to-wafer (W2W) and die-to-wafer (D2W) hybrid bonding in advanced packaging applications. Conventional chemical mechanical polishing (CMP) struggles to prevent corrosion and excessive recessing of the Cu pads, particularly when they are connected to long metal lines. These issues compromise the quality and reliability of…
Selective Wet Etching of SiO2 through Fluorine Species Control
The selective wet etching of silicon dioxide (SiO 2 ) over silicon nitride (Si 3 N 4 ) is a critical process in semiconductor fabrication. In this study, the etching behavior of SiO 2 in HF solution was investigated by analyzing the individual contributions of F – , HF, and HF 2 – . Contrary to the previously proposed etching mechanism of SiO 2 , the etching of SiO 2 was observed even when the HF 2 – concentration was significantly low. This suggests that F – and HF also…
Dissolution and Removal of Ceria Particles by Post-CMP Cleaner
Chemical mechanical planarization (CMP) employing ceria (CeO2) abrasives is widely regarded as a critical process in semiconductor manufacturing due to their superior removal rates for SiO 2 films compared to other abrasives. However, the efficient removal of ceria residues from the surface remains a significant challenge. Ceria particles are strongly adhered to SiO 2 surfaces through both chemical and electrostatic interactions. In this study, we developed a post-CMP…
Assessment of Stripping Efficiency of Non-TMAH Based Solvents on Photoresist and Temporary Bonding Materials
Effective removal of photoresist (PR) and Temporary Bonding Materials (TBM) is critical in advanced packaging and three-dimensional integration (3Di) processes within semiconductor manufacturing. Traditional wet stripping methods, primarily based on tetramethylammonium hydroxide (TMAH), offer high performance but pose significant environmental and health risks. To address these concerns, this study explores the use of water-based, environmentally benign stripping…
Effect of Pad Pore Size and Applied Pressure on Environmentally Friendly Buff Cleaning Using Gas-Dissolved Water for Ceria Nanoparticle Removal
This study investigates an environmentally friendly buff cleaning technique aimed at removing ceria nanoparticles remaining after chemical mechanical planarization (CMP), a critical step in semiconductor fabrication where post-cleaning is essential to prevent yield loss caused by particle contamination. Gas-dissolved water (GDW), prepared by dissolving CO₂ or N₂ into DI water, was utilized to generate micro-and nanobubbles that assist in particle detachment through physical…
Ion-implantation-induced polyimide reconstruction and Cu interfacial adhesion
Reliable metallization of polymer substrates is essential for flexible electronics, advanced packaging, and high-frequency systems, yet achieving strong metal/polymer adhesion while maintaining good electrical performance remains challenging. Here, carbon-ion, nitrogen-ion, and carbon/nitrogen dual-ion implantation were used to modify polyimide, with the implantation conditions independently adjusted to obtain nearly identical surface free energies of 46.43–47.22 mJ m -2…
Mechanism‐Driven Purification of High‐Purity Quartz: Impurity Speciation, Surface Chemistry, and Advanced Beneficiation Technologies
ABSTRACT High‐purity quartz (HPQ) is essential for semiconductor manufacturing, photovoltaics, optical systems, and other advanced technologies, where even trace impurities can compromise material performance. Despite extensive research on quartz beneficiation, the mechanisms governing impurity removal, interfacial reactions, and purification efficiency remain poorly understood. This review establishes a mechanism‐driven framework linking geological provenance, impurity…
In Situ Monitoring for Wet Rinse Process Using Electrochemical Impedance Spectroscopy on Sensing Wafers
In recent years, the interest in reducing environmental impact has been increasing. This trend is evident in the semiconductor manufacturing, where the development of a tool that can simultaneously offer environmental friendliness and high performance is becoming more in demand. The semiconductor cleaning process, which uses a significant amount of liquids, is one area where reduction efforts are particularly needed. To reduce the consumption of liquids, it is crucial to…
Recent Developments in AI Technology and Its Application to Wet Process Optimization
Recent advancements in artificial intelligence (AI) have increased the need for high-performance, high-capacity semiconductors. Consequently, cutting-edge semiconductor structures have become increasingly complex, requiring highly precise optimization in manufacturing processes, and achieving high yield rates within short periods has become challenging. This study focuses on the use of various yield improvement and process development methods using AI in semiconductor…
High-Performance and Safer Wet Stripper for 50 to 400 µm-Thick Negative Photoresists and Laminated Films in Wafer Level Packaging
Thick negative-tone photoresists are increasingly used to fabricate high-aspect-ratio structures such as copper pillars, which are critical in advanced packaging technologies. However, their high film thicknesses and strong crosslinking make complete removal particularly challenging. This study presents the development of a new photoresist stripper formulation, free of N-methyl-2-pyrrolidone (NMP) and tetramethylammonium hydroxide (TMAH), designed to address both efficiency…
Synergistic Effects of Surfactants on Ceria Removal Efficiency during SC1-based Post-CMP Cleaning
This study aims to enhance SC1-based post-CMP cleaning efficiency by evaluating various surfactants for effective CeO2 particle removal from SiO2 surfaces. Among the tested surfactants, Sarkosyl NL demonstrated superior performance, achieving a removal efficiency of 97.85%. Its anionic nature promotes electrostatic repulsion, preventing particle redeposition, while its thermal stability ensures consistent cleaning efficiency even under prolonged heating. Effective micelle…
Recent Advances in Heteroepitaxial Growth and Non-Epitaxial Integration of Ga 2 O 3 on Silicon
Abstract Gallium oxide (Ga 2 O 3 ) is an emerging semiconductor with a wide bandgap of 4.8-5.3 eV, featuring ultra-high breakdown electric field strength, great thermal stability, and resistance to extreme environments, making it an ideal choice for deep ultraviolet optoelectronic devices, high-power electronic devices, high-frequency Radio Frequency (RF) devices, etc. However, the difficulty in obtaining large-area, high-quality epitaxial layers, together with the…
A multi-population cooperative Jaya algorithm with adaptive rescheduling strategy for dynamic scheduling in semiconductor manufacturing system
Time-window constraints (TWCs) and dynamic disruptions complicate semiconductor wafer fabrication scheduling. To address this issue, we present a rescheduling approach incorporating deep reinforcement learning and the multi-population Jaya algorithm (DRL-MPJA). An adaptive DRL-based rescheduling trigger handles uncertain events, and the DRL agent adaptively selects the optimal strategy by real-time states and rewards. For complete rescheduling, three sub-populations optimise…
Research progress on levelers in acidic copper electroplating systems
Acidic copper electroplating is a core process for high-density electronic interconnections, where coating uniformity and void-free filling directly determine reliability. As via structures evolve toward higher aspect ratios and finer dimensions, levelers are essential for achieving defect-free superfilling through selective inhibition at protrusions while allowing deposition in recesses. This review summarizes the interfacial mechanisms of levelers in copper plating…
High-Temperature Resistant Laser-Release Material for Advanced Packaging Temporary Bonding/Debonding Applications
High‑temperature process steps are becoming increasingly prevalent in advanced packaging as the industry advances toward high‑density 3D architectures. Techniques such as plasma‑enhanced chemical vapor deposition (PECVD), hybrid bonding, silver sintering, encapsulant curing, and thermal compression bonding—commonly performed between 250°C and 350°C—introduce significant demands for temporary bonding/debonding (TBDB) materials. These elevated temperatures challenge the…
Domestic Build-Up Film Advancing Fan-Out Wafer-Level Packaging (FOWLP) Through the SHIELD USA Program
Build-up films (BUF) serve as critical dielectric layers in advanced package substrates, where they enable fine pitch interconnects, multilayer redistribution routing, and the high-density integration required for next generation semiconductor devices. These engineered polymeric dielectrics are formulated to achieve a combination of low dielectric constant (Dk) and low dissipation factor (Df), while maintaining excellent thermal, mechanical, and electrical reliability. Key…
Single Bath Copper Electroplating for Seam Free Metallization of Ultra High Aspect Ratio (AR ≤ 34) Through Glass Vias
This work demonstrates a single-bath Cu electroplating process for void-free, seam-free filling of through glass via (TGV) with aspect ratio (AR) up to 34 using direct current (DC) control. Glass substrates of thickness 340 μm and via openings of 10 and 25 μm were studied. A virgin make-up solution with functional additives was developed. Under DC potential control, a suppressor system based on NBT and Tetronic 701 enabled rapid formation of a short H-shaped bridge (~10 μm)…
Warpage Control Strategies in 3D Advanced Packaging: A Focus on Post-Processing and Material-Level Optimization
As semiconductor architectures vertically scale through high-density 3D advanced packaging, wafer-level warpage introduces severe failure modes that threaten process yield and structural reliability. Driven by the coefficient of thermal expansion (CTE) mismatch between heterogeneous materials, uncontrolled warpage induces critical defects—such as warpage induced cracks and difficulties in post processing—while complicating the package integration. To address these…
Cost Analysis of 310x310mm Panels for High-Performance Computing Driven by Artificial Intelligence
Using square or rectangular panels instead of round wafers has been a topic of interest in the microelectronics packaging industry for years. A more recent addition to the discussion is the potential to use panels for advanced packaging applications. This contrasts with earlier panel-level analyses that focused on smaller, basic fan-out packages. Whether evaluating panels for simpler or more complex packages, one primary focus of any panel-level discussion is the potential…