Chips and semiconductors: research

Journal articles, academic blogs, think-tank reports and papers in this section, newest first. Back to the news.

Journal articles (OpenAlex) Jeongsik Kim, Jinmo Kim, Cheolhong Park et al. · Journal of Micro/Nanopatterning Materials and Metrology

Recessing material and process for improving contact hole patterns for high-NA and hyper-NA EUV lithography

In high-NA and hyper-NA EUV lithography, the reduced depth of focus (DOF) necessitates the use of thin resist films. However, increasing the resist thickness is advantageous for improving the local critical dimension uniformity (LCDU) of contact-hole patterns. This creates an inherent trade-off between LCDU improvement during exposure and DOF control in the final resist pattern. To address this challenge, we propose a new material and process scheme in which the resist is…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Danilo D. Simone · Journal of Micro/Nanopatterning Materials and Metrology

Technology readiness of PFAS-free lithography materials: an anonymized survey of resist and ancillary material maturity

BackgroundPer- and polyfluoroalkyl substances (PFASs) are widely used in lithography materials because of their unique chemical and surface properties, but their extreme environmental persistence and toxicity drive increasing regulatory and sustainability pressure to eliminate their use. Substantial efforts are therefore underway to develop PFAS-free alternatives for photoresists and associated lithography materials across deep ultraviolet and extreme ultraviolet (EUV)…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sajjad Parvin, Chandan Kumar Jha, Paul Flammarion et al. · ACM Transactions on Design Automation of Electronic Systems

The Deception of Sight: Camouflaging Chips Information Against Optical Probing Attacks By Selective Increase of Local Density

In recent years, a novel non-invasive laser-assisted attack known as Optical Probing (OP) has been demonstrated to effectively probe the internal state of integrated circuits. This attack exploits the relative transparency of the silicon substrate to Near-InfraRed (NIR) light, enabling optical access through the backside of the chip. Consequently, OP poses a significant threat to information processed or stored on the chip and may facilitate Intellectual Property (IP) theft…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Peter Radic · Optics Express

Monolithic carrier-beam steering with milliradian precision and single-voltage control

We describe what we believe to be a new class of monolithic beam steering systems. The device operates in the conventional 1550 nm communication band and can continuously steer over a 65.2° range with milliradian precision. The reported performance rests on two distinct advances, compatible with commercial foundry processes. The device core is a nonuniform, liquid-crystal-clad Si 3 N 4 leaky grating, controlled by a single drive voltage over the entire operating range. The…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yonatan Piasetzky, Yuval Warshavsky, Haim Suchowski et al. · Optica Quantum

High-fidelity CNOT gates in photonic integrated circuits using composite segmented directional couplers

Directional couplers are fundamental building blocks for integrated quantum photonic circuits but are highly sensitive to fabrication imperfections. We demonstrate that composite segmented directional couplers (CSDCs) enhance gate fidelity without active tuning. We design and fabricate fully integrated photonic controlled-NOT (CNOT) gates using both uniform and composite coupler variants and compare their performance via simulation, classical characterization, and quantum…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Anand Raj, Pabitra Das, Amit Acharyya · ACM Journal on Emerging Technologies in Computing Systems

ORCA: Oracle-less CNN-based Structural Attack on Hardware Obfuscation and Reverse Engineering to RTL

In this paper, we propose ORCA, an oracle-less, CNN-based structural attack methodology that circumvents logic locking by predicting the key of a locked gate-level netlist and reversing it to RTL. The proposed methodology learns the features of a local gate near the root node in the obfuscated design to predict the key of the locked netlist. This methodology is evaluated on different standard benchmark suites such as ISCAS-85, ITC-99, and EPFL. ORCA predicts the key with an…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zaitian Chen, Weiran Chen, Song Chen et al. · ACM Transactions on Design Automation of Electronic Systems

AceTherm: Accelerated Thermal Analysis of Chiplet Integration Using Non-Conformal FEM

As advanced process nodes continue to scale, heterogeneous integration technologies such as 2.5D/3D packaging, chiplets, and high-bandwidth memory have been widely adopted. However, these advances introduce substantially higher power densities, more complex interconnection structures, and increasingly diverse material systems. The resulting localized hotspots raise reliability concerns such as electromigration, thermomechanical stress, and structural warpage, making…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Nathaniel Furman, Albert Herrero-Parareda, Anthony Rapp et al. · Optical Materials Express

Experimental measurement of enhanced group delay in silicon photonic waveguides indicative of the frozen mode regime around the stationary inflection point [Invited]

The dispersion engineering of periodic silicon photonic waveguides presents opportunities for significant group delay enhancement compared to uniform waveguides of comparable length. We describe the spectral response characteristics for measured devices composed by three coupled waveguides and compare their properties to modeled data. These waveguides support the frozen mode regime (FMR) around near infrared wavelengths and are expected to show enhanced group delays around…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ch. Sreedhar, Dr. Ch. Raja, Dr. Amit Jain · Acta Innovations

ADAPTIVE 3D CHIPLET ARCHITECTURE WITH HYBRID WIRED–WIRELESS INTERCONNECT FOR ENERGY-EFFICIENT HETEROGENEOUS COMPUTING

Chiplet integration provides a scalable alternative to monolithic system-on-chip design, but the decomposition of a large die introduces a communication penalty arising from die-to-die interfaces, inter-chiplet distance, routing hops, and packaging overhead. This paper develops an adaptive three-dimensional (3D) chiplet architecture that combines decomposition-aware chiplet selection, vertically stacked compute–memory organization, and a hybrid wired–wireless interconnection…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Praveen Kumar Pandey, Meena Raju · Scientific Reports

Cement-free composite brick from waste foundry sand and mixed post-consumer thermoplastic waste for sustainable construction

The emergence of environmentally conscious construction practices aligned with circular economy principles has become increasingly important due to the accelerating depletion of natural resources. Therefore, this study aims to develop a value-added pathway for the reutilisation of waste plastic and foundry sand to create a cement-free perforated composite brick using waste foundry sand (WFS) and mixed post-consumer thermoplastic waste (PTW). The PTW comprised polyethylene…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Raghunath Mallavarapu, P. Kanaka Raju, Chandu Kavitha · Array

Optimized deep transfer learning for ADAS sensor fusion: YOLOv8 and planet optimization-tuned BiGRU approach

Object recognition and detection using high-definition video data and millimeter-wave radar can significantly enhance the safety of intelligent driving systems. However, integrating data from these modalities poses challenges due to differences in data formats, coordinate transformations, and mismatched data levels. Ensuring precise detection of surrounding objects is crucial for autonomous vehicle decision-making and safe driving. In complex traffic conditions, occlusion…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Suhasini Jindal, Harshita Jain, Lovepreet Singh · Discover Energy

A critical review of barriers to achieving net-zero emissions in the information technology-enabled services sector

Information Technology-Enabled Services (ITeS) have typically been viewed as producing less carbon emissions than sectors that are energy- and material-intensive. However, the rapid expansion of cloud computing, data centres, artificial intelligence, platform-based services, and globally distributed digital operations is increasing the sector’s electricity demand and associated greenhouse gas emissions. This systematic review synthesises 78 studies to identify the principal…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Manjunatha Mahadevappa, N. Suresh, Vivek Bindiganavile et al. · Journal of Structural Fire Engineering

Elevated temperature effects on elastic modulus degradation and microstructural evolution of waste foundry sand concrete

Purpose The present investigation aims to examine the impacts of high temperature on the flexural strength and modulus of elasticity properties of concrete specimens produced by substituting waste foundry sand at 25%, 50%, 75% and 100% of the river sand. The modulus of elasticity and flexural strength of samples with 100% waste foundry sand (CFS-4) content decreases as the temperature increases. At 600°C temperature, the specimens with 100% waste foundry sand (CFS-4) shows…

Read at Journal articles (OpenAlex)

War on the Rocks Charles Edward Gehrke Geopolitics

How Taiwan Activates Beijing’s Chosen Fear

The standard explanations for why Taiwan is so important to the Chinese Communist Party are familiar: territorial integrity, credibility of deterrence commitments, great power competition with the United States, the strategic value of the first island chain, and the semiconductor industry concentrated in TSMC’s fabrication facilities. These explanations work, but they don’t tell the whole story. Rational strategic calculation does not produce a posture in which a…

Read at War on the Rocks

Journal articles (OpenAlex) Paul Craddock · METALLA

New Evidence for Iron Smelting on the Greek Furnace / Foundry Vessels

This paper concerns a previously neglected Greek black-figure vessel depicting iron smelting. The importance of the vessel is that it depicts a group of men hammering a large flaming block. This, when taken in context with the scenes shown on some of the well-known furnace / foundry vessels shows that the operation is clearly that of bloom smithing a freshly smelted iron bloom. It is the only depiction of such an operation known from antiquity. Together with the various…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tianmiao Zhang · Applied and Computational Engineering

Network-on-Chip Technology for Chiplet Integration Architecture

In today's era, the marginal benefits of transistor scaling are continuously decreasing, and Chiplet heterogeneous integration has become the mainstream path for scaling AI chip computing power. Meanwhile, on-chip interconnect performance is increasingly becoming the key factor limiting system computing power and energy efficiency. This paper focuses on on-chip network technology for Chiplet-integrated AI chip architectures, providing a systematic review and analysis of its…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Arkadev Roy, Daniel Klawson, Jianheng Luo et al. · Optics Letters

Zero-change foundry compatible silicon photonics MEMS optical switch

Large-scale photonic switches are emerging as essential devices for energy-efficient optical interconnects in data centers and AI/ML clusters as a key enabler for high-bandwidth and low-latency connectivity. Combining micro-electro-mechanical (MEMS) based mechanical reconfigurability with silicon photonic integrated circuits can enable a large-scale, low-loss, programmable platform required for large-scale optical circuit switches. We demonstrate a broadband silicon…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Peng Wang, Meng Qin · Sustainability

Geopolitical Pressure and the Resilience of China’s Resource Governance System on the Pathway to an Environmental Economy

China’s resource, energy transition and supply chain governance institutions are increasingly tested by geopolitical pressure centred on China. Treating that pressure as the external environment of the national governance system, this study asks where it reaches the material foundations of the pathway to an environmental economy, transition-critical metals and clean energy equities, and where it is contained. We construct a relative measure that isolates China-centred…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Md. Rownak Hossain, Kazi Asifuzzaman, Mostafizur Rahman · Future Generation Computer Systems

Memory-aware scheduling of AI workloads on a Messaging-based vector processing unit

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Seyed Zeynab Hosseini, Parviz Fattahi, Saeed Emami · Journal of Simulation

Increasing steel production line productivity using lean production and simulation with uncertainty: a case study

Many large manufacturing plants implement lean manufacturing principles to identify and eliminate non-value-added activities that generate waste. A key tool in lean manufacturing is Value Stream Mapping (VSM), which helps visualize production processes and identify inefficiencies. However, VSM is a static tool and cannot dynamically assess the impact of lean improvements or compare different implementation scenarios. To address this limitation, simulation tools are valuable…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kangxi Feng · Applied and Computational Engineering

The Functions of Architecture of System-on Chips and Development Prospects of Combining with Artificial Intelligence

In the current era of the 21st century, as the world's population has already reached a historic milestone of 8 billion, the urban scale has expanded and the population density of cities has tremendously risen. Similar to the trend of urban construction, the chips have also developed. For instance, the SoC (System-on-Chip) has some key additions, including upgraded ray tracing-supportive GPUs, new CPU microarchitectures and dedicated artificial intelligence accelerators…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ramesh Kumar, Sudarshan Ainwad, K.S. Ranjani et al. · International Journal of Production Research

Digital transformation of wafer fabrication process: a case of semiconductor manufacturing

Semiconductors are essential for the digital revolution, modern electronics, and global economic growth. However, the growing demand, geopolitical tensions, and supply chain disruptions have accelerated the adoption of artificial intelligence (AI) and digital technology (DT) in semiconductor manufacturing. To address this gap, we studied five use cases from leading semiconductor manufacturers (Intel, Micron, Sony, Samsung, and SK Hynix). We investigate the application of AI…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Noor Afsary, Shubham Mishra, Vishal Saxena · Optics Letters

Sub-mW low-latency silicon thermo-optic phase shifter using a foundry substrate undercut heater

We demonstrate a compact, foundry-compatible silicon thermo-optic phase shifter (TOPS) based on a substrate-undercut doped-silicon heater, achieving a π -phase-shift power of P π =0.74 mW at a drive voltage of only V π =0.91 V. Prior low-power phase shifters reach comparable or lower P π only by extending the heated length, enlarging the footprint, and none report CMOS-compatible drive voltages. Here, both the heater and the 2×2 multimode interference (MMI) couplers are…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Chaebeen Yun, Seolim Yoon, Myung Jun Kim · Materials & Design

Unidirectional Cu filling of TGVs using highly-concentrated Cu-MSA electrolytes

Glass substrates have recently attracted considerable attention as next-generation semiconductor packaging platforms capable of replacing conventional Si interposers and organic substrates for AI accelerators and other advanced semiconductor packages. However, the commercialization of glass substrates is hindered by their low manufacturing yield and poor process productivity. Through-glass vias (TGVs) provide the essential vertical electrical interconnections in glass…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Suruchi Bala, James Blatcher, Hodjat Hajian et al. · IEEE Photonics Technology Letters

Silicon Photonic Integrated Circuit DBRs Using Foundry-Based 248-nm DUV Lithography

Silicon-on-insulator (SOI) platforms enable compact and high-performance photonic devices due to their strong refractive index (RI) contrast, but device performance is highly sensitive to dimensional variations, particularly for periodic structures such as distributed Bragg reflectors (DBRs). Their implementation in standard 248 nm deep ultraviolet (DUV) multi project wafer (MPW) foundry platforms is particularly challenging due to minimum feature size (MFS) constraints and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Juan Luis Soler-Fernández, Angel Dieguez, Joan Daniel Prades et al. · Scientific Reports

An n-FET-only IGZO low-dropout regulator evaluated under practical power-management conditions

Power-management circuits remain underdeveloped in flexible electronics, limiting autonomous sensing and control systems. Thin-film transistor low-dropout (LDO) regulators have demonstrated voltage regulation beyond silicon, but standalone metrics alone do not show whether foundry-enabled IGZO regulators can support practical low-power rails. We report an n-FET-only IGZO low-dropout regulator evaluated as a power-management block, not only as a standalone circuit. The…

Read at Journal articles (OpenAlex)

Older stories