Chips and semiconductors: research

Journal articles, academic blogs, think-tank reports and papers in this section, newest first. Back to the news.

Journal articles (OpenAlex) Zijie Deng · Applied and Computational Engineering

Opportunities and Limitations of AI Technology Empowering Chip Design

As semiconductor manufacturing processes approach physical limits, the complexity and R&D costs of chip design continue to rise, highlighting the efficiency bottlenecks of traditional design methodologies. The rapid advancement of artificial intelligence (AI) has introduced novel solutions to chip design, emerging as a core focus of the industry. This paper takes the integrated application of AI and chip design as the research subject, and systematically sorts out AI…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Elizabeth Kuruvilla, Utsav Banerjee · IACR Communications in Cryptology

Cinco de MAYO: Accelerating Post-Quantum Multivariate Quadratic Signatures with RISC-V

MAYO is a digital signature scheme based on the multivariate public key cryptography paradigm, designed to provide security in the post-quantum setting. MAYO emerged as a promising candidate during the NIST Post-Quantum Cryptography (PQC) standardization process for additional digital signatures. In this work, we present the first RISC-V-based hardware-software co-design of MAYO. We accelerate the computational bottlenecks of AES-128-CTR-based seed expansion and GF(16)…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Xander Peetroons, Xunyao Luo, Tsung-Yeh Yang et al. · Applied Physics Letters

High-fidelity qubit control in a natural Si-MOS quantum dot using a 300 mm silicon on insulator wafer

We demonstrate high-fidelity single qubit control in a natural Si-MOS quantum dot fabricated in an industrial 300 mm wafer process on a silicon on insulator wafer using electron spin resonance. A relatively high optimal Rabi frequency of 5 MHz is achieved, decoupling the electron spin from its 29Si environment. Tracking the qubit frequency reduces the impact of low-frequency noise in the qubit frequency and improves the TRabi from 7 to 11 μs at a Rabi frequency of 5 MHz…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) L. Böttcher, David Schütze, Thomas Löher et al. · IMAPSource Proceedings

Advanced Embedding Technologies for High Performance SiC Power Modules in Automotive Applications

The ongoing transition towards electrified powertrains places increasing demands on power module performance, reliability, and scalability. Automotive traction inverter applications based on silicon carbide (SiC) MOSFETs require advanced packaging solutions capable of supporting high power density, low parasitic inductance, and efficient thermal management. Conventional module concepts are increasingly challenged by the fast switching behavior of SiC devices and the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Oliver M. ‐R. Chyan, Kevin Antony Jesu Durai, Khanh Tuyet Anh Tran et al. · IMAPSource Proceedings

Enabling Low-Temperature Cu-to-Cu Direct Bonding via Nanocrystalline Cu and Cu-Selective Oxide Suppression Coating

The rapid advancement of artificial intelligence (AI), high-performance computing (HPC), and data-centric technologies is driving demand for interconnects with ultra-high density, low resistance, and superior reliability. While Cu-to-Cu direct bonding offers significant advantages over conventional Cu-to-solder interconnects, including ultra-fine pitch capability, lower electrical resistance, and improved thermal performance, its widespread adoption remains limited by the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Chongyang Cai, Liu Jiang, El Mehdi Bazizi · IMAPSource Proceedings

Characterizing the Impact of In-Plane Deformation in Die-to-Wafer Hybrid Bonding from Die Warpage and Bonder Shape Effects

The increasing demand for high-performance computing and artificial intelligence is accelerating the adoption of advanced packaging technologies capable of supporting a higher number of interconnects with reduced pitch. Die-to-wafer (D2W) hybrid bonding has emerged as an important enabler for next-generation heterogeneous integration because it provides high-density interconnects with superior electrical performance. However, the process also introduces critical overlay…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Oliver M. ‐R. Chyan, Shyam Muralidharan Nair, Duwage Anushka Sandaruwan Perera et al. · IMAPSource Proceedings

Sustainable Ambient-Air Cu-Cu Wedge Bonding via Cu-Selective Ultrathin Passivation

Despite advances in 2.5D and 3D packaging, wire bonding remains the most widely used interconnection method in the semiconductor industry. Direct copper-to-copper (Cu-Cu) wedge bonding is highly valued in IC packaging due to its excellent electrical and thermal properties and lower material cost compared to gold (Au). However, its industrial use is limited because bare Cu surfaces oxidize rapidly at typical assembly temperatures (198-200 °C), forming a native Cu oxide…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tindara Verduci, Arjun Wadhwa, Ruud de Wit · IMAPSource Proceedings

Advancing Panel-Level Fan-Out Technologies for High-Frequency and Power Devices through Alternative Through-Package Interconnects

Future communication, radar, and power management systems require semiconductor components that deliver higher performance, smaller footprints, and lower manufacturing costs. The ongoing transition within the semiconductor industry from wire and clip bonding and wafer-level packaging toward fan-out panel-level packaging (FOPLP) is largely driven by these requirements and by the improved area utilization offered by panel-level manufacturing compared with the maximum 300mm…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Guillem Colom Piella · European Security

When arms embargoes become procurement problems: Spain, Israel and normative decoupling in defence acquisition

Arms embargoes are usually analysed as foreign-policy decisions or export-control instruments. This article argues that, when the targeted state is also embedded in the sanctioning state's defence acquisition system, an embargo becomes a domestic procurement-governance problem. It develops the concept of normative decoupling: the attempt to reduce, suspend or terminate dependencies on a politically or legally unacceptable supplier while preserving military capability…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Shengwei You, Andrey Kuehlkamp, Aditya Joshi et al. · Blockchains

Breaking the Peg, or Not: The Limited Power of Oracle Manipulation Against Early Stablecoin Depeg Prediction

A common worry about depeg predictors is that an adversary who manipulates oracle prices can blind them. We test it on a new multi-source corpus of twelve historical stress episodes across nine assets and three chains. Under retrospective leave-one-event-out testing, the reconstructed models span 0.558–0.772 ROC-AUC, with our reference predictor at 0.762; the source papers report different metrics and tasks that are not directly comparable. Manipulable price features hurt…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Na-Hyeon Cho, Min-Jung Kim, Yookyung Jeong et al. · Sustainability

Comparison of Batch and Column Leaching Conditions for the Environmental Assessment of Waste Foundry Sands Intended for Media Contact Recycling

Driven by the global sand crisis, waste foundry sand (WFS) is increasingly valorized as an alternative aggregate, which makes evaluating its ecological safety important. Regulatory approval usually rests on a single leaching test, which may not represent the range of conditions to which WFS can be exposed. Here, 17 WFS samples were evaluated using three standardized batch tests—neutral water (KLT), an organic acid fluid (TCLP) and an inorganic acid fluid (SPLP)—and an…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tailong Shi, Qi Li, Hongfei Chen et al. · Micromachines

A Comparative Study of Parylene, PSPI and ALD TiO2/TiN/Ru/Cu Multilayer as Adhesion Layers on Glass Surface for Glass-Cu Adhesion Enhancement

Glass substrates exhibit great potential in 2.5D/3D advanced packaging, but poor interfacial adhesion with metal layers remains a critical challenge. This work studies three different adhesion layer strategies, namely Parylene-C, photosensitive polyimide (PSPI), and atomic layer deposition (ALD) TiO2/TiN/Ru/Cu multilayer, to improve glass-Cu adhesion. A 30 µm Cu layer was electroplated over glass-Parylene-Ti/Cu, glass-PSPI-Ti/Cu, and glass-TiO2/TiN/Ru/Cu multilayer stacks…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Venkat Rao Pasupuleti, Karaka Tejasri, Vishni Teja et al. · Engineering Research Express

Physics-informed Graph-ResNet for real-time VLSI wirelength prediction with HPC enabled data

Abstract In very large scale integration physical design, accurate pre-routing wirelength prediction is a crucial bottleneck. Graph neural networks (GNNs) attain excellent accuracy but have seconds of inference latency, which prevents real-time application inside placement loops, whereas analytical heuristics diverge under congestion. To address these limitations, this paper presents a complete framework based on a proposed Physics-Informed Graph-ResNet. First, we create a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Suruchi Bala, Hodjat Hajian, Alex S. Clark et al. · IEEE photonics journal

Performance and Yield Analysis of Distributed Bragg Reflectors on Foundry-Based Deep UV SOI Chips

Silicon waveguide distributed Bragg reflectors (DBRs) were designed and fabricated using a 248 nm Deep Ultra-Violet (UV) projection lithography process within a photonic foundry platform. The influence of key structural parameters, including grating period, fill factor, number of periods, and corrugation width, on the spectral response of the device was systematically investigated. The measured Bragg wavelength, extinction ratio, and 3 dB bandwidth were statistically…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Héctor López Nicolás, J. C. Ventura Castro, Gerardo Antonio Fonseca-Hernández et al. · Journal of Composite Materials

Mechanical recycling of CFRP Composites—Part I: Characterizing carbon fiber and cured epoxy as dispersed phases

This study investigates carbon-fiber fabric and cured epoxy as separate fractions to establish a baseline for the mechanical valorization of carbon fiber-reinforced polymers (CFRP). Unrecycled components were used to isolate the effects of identity, geometry, processing, and reinforcement content without the variability of CFRP recyclates. Millimeter-scale fabric fragments and cured-epoxy chips from face and peripheral milling were added to an epoxy matrix at 1–5 wt%…

Read at Journal articles (OpenAlex)

CEPA (Center for European Policy Analysis) Christopher Cytera Geopolitics

A Silicon Curtain Is Descending Across the Semiconductor World

Chipmakers traditionally shared ideas and advances with colleagues around the globe. No longer.

Read at CEPA (Center for European Policy Analysis)

Journal articles (OpenAlex) Tailong Shi, Lihong Chen, Qi Li et al. · Micromachines

A Review of Research Progresses in Through-Glass Via (TGV) Metallization

Through-glass vias (TGVs), as key vertical interconnect structures in 2.5-D/3-D advanced packaging, offer low dielectric loss, low parasitic capacitance, and excellent high-frequency transmission performance. However, several challenges remain in TGV metallization, including (1) incontinuity of seed layers in high aspect ratio TGVs; (2) non-uniform distributions of copper-ion concentration and current density, leading to significant differences in copper deposition rates…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Seungho Lee, Seungchan Lee, Jiwon Kim et al. · Journal of Micro/Nanopatterning Materials and Metrology

Impact of mask absorber geometry on imaging stability in extreme-ultraviolet lithography with high numerical aperture

Extreme-ultraviolet lithography (EUVL) mask absorber patterns inherently form trapezoidal cross-sectional profiles, characterized by a sidewall angle (SWA), because of process limitations. However, this feature has often been considered a fabrication imperfection rather than an optical design parameter. To assess process tolerance, we systematically investigate how the geometric profile and optical constants of mask absorbers influence imaging performance in next-generation…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yi-Jen Huang, Amir Reza Ansari Dezfoli, Melika Chaji et al. · The International Journal of Advanced Manufacturing Technology

Flow modification and oxygen redistribution in Magnetic Czochralski silicon growth: a 3D transient simulation with experimental validation

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jungwoo Ahn, Jihoon Bae, Hyojin Ahn et al. · Systems

Schedule-Informed Empty-Vehicle Dispatching for OHT Systems in Semiconductor Manufacturing

Overhead hoist transport (OHT) performance affects the execution of semiconductor production schedules because transport delays postpone subsequent operations. This study develops the Scheduler and OHT Allocation Monitoring Simulator (SOMOS), an event-driven environment that integrates machine processing, transport request generation, OHT movement, and subsequent production execution. Based on SOMOS, we propose Schedule-informed Empty-Vehicle Dispatching (SEVD), which…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zhaohui Wang, Ting Chen, Jiahui Wang et al. · Journal of King Saud University - Computer and Information Sciences

Design and implementation of a wafer-level verification system targeting 2D-mesh interconnection networks

System on Wafer (SoW), as a key technological path to break through the traditional chip area limitation and achieve a leap in computing power, has become an active research focus in the field of integrated circuits in the post-Moore era. In response to the diverse, dynamic, and high-speed communication requirements in AI and high-performance computing, building a wafer-level reconfigurable switching network has emerged as an effective solution. However, constrained by…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Seung-Kyu Kim, Ji-Hoon Kang, Jongwook Jeon et al. · JSTS Journal of Semiconductor Technology and Science

Performance Analysis on Silicon Bridge with Chessboard Patterned Interconnect

A signal integrity and routing density analysis of a chessboard patterned interconnect (CPI) structure for Si bridge-based die-to-die interconnects is presented, targeting compliance with the Universal Chiplet Interconnect express (UCIe) standard. The CPI structure is compared against conventional fully shielded (FS) S1G1 and SnG1 configurations through full-wave electromagnetic and time-domain simulations. Key electrical transmission performance metrics include…

Read at Journal articles (OpenAlex)

Older stories