Chips and semiconductors: research

Journal articles, academic blogs, think-tank reports and papers in this section, newest first. Back to the news.

Journal articles (OpenAlex) Diane Bijou, Loriana Celeste, Jérôme Daviot · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

High-Performance and Safer Wet Stripper for 50 to 400 µm-Thick Negative Photoresists and Laminated Films in Wafer Level Packaging

Thick negative-tone photoresists are increasingly used to fabricate high-aspect-ratio structures such as copper pillars, which are critical in advanced packaging technologies. However, their high film thicknesses and strong crosslinking make complete removal particularly challenging. This study presents the development of a new photoresist stripper formulation, free of N-methyl-2-pyrrolidone (NMP) and tetramethylammonium hydroxide (TMAH), designed to address both efficiency…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ju Yong Lee, Chulwoo Bae, Jungjae Park et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Synergistic Effects of Surfactants on Ceria Removal Efficiency during SC1-based Post-CMP Cleaning

This study aims to enhance SC1-based post-CMP cleaning efficiency by evaluating various surfactants for effective CeO2 particle removal from SiO2 surfaces. Among the tested surfactants, Sarkosyl NL demonstrated superior performance, achieving a removal efficiency of 97.85%. Its anionic nature promotes electrostatic repulsion, preventing particle redeposition, while its thermal stability ensures consistent cleaning efficiency even under prolonged heating. Effective micelle…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Eric M. M. Tan, Priyanka Proost, Patrick Dekort et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Bridging the Gaps to Achieve Ultra-Clean Processing and Surface Preparation of Germanium Wafers

Germanium has re-emerged as an important material for optoelectronic, photonic, and space photovoltaic applications because it combines high carrier mobility, favorable optical properties, and radiation tolerance with an important role in multi-junction solar cells that achieve high power conversion efficiency. However, the integration of germanium wafers into silicon CMOS foundries requires ultra-clean surfaces and remains challenging because standard silicon-oriented…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) E. Deloffre, A. Girardon, Sébastien Mermoz et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Surface Preparation Challenges for Direct Bonding in 3D Integration

The relentless advancement of microelectronics, historically driven by Moore’s Law, faces increasing challenges as device scaling approaches fundamental physical and economic limits. To overcome these constraints, the semiconductor industry has adopted the "More than Moore" approach, emphasizing heterogeneous integration of diverse functionalities within compact 3D architectures. Central to this evolution, bonding techniques, particularly direct and hybrid bonding, enable…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tawfique Hasan · Advanced Photonics

Better than ourselves: a conversation with Roel Baets

Roel Baets helped turn silicon photonics from scientific curiosity into industrial platform, then built the foundry access, education, and spin-off ecosystem that let the field flourish. The Ghent University emeritus talks to Advanced Photonics about showstoppers, supply chains, and why his group never wanted to be the best. Watch the full interview at https://doi.org/10.1117/1.AP.8.5.050503.

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) P. Garnier, Hugo Galbes · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Nonvisible Material Degradation by Physical Cleaning

The semiconductor industry relies heavily on physical cleaning processes such as high-velocity sprays to remove particles from wafer surfaces. Although these methods effectively detach particles, they can also induce subsurface damage, particularly nanoscale cracks that remain undetectable by conventional inspection techniques. This study presents a comprehensive investigation into the mechanisms behind barely visible material degradation caused by physical cleaning sprays…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Jialei Huang, Jiaqing Yuan, Shan Li et al. · Chinese Physics B

Recent Advances in Heteroepitaxial Growth and Non-Epitaxial Integration of Ga 2 O 3 on Silicon

Abstract Gallium oxide (Ga 2 O 3 ) is an emerging semiconductor with a wide bandgap of 4.8-5.3 eV, featuring ultra-high breakdown electric field strength, great thermal stability, and resistance to extreme environments, making it an ideal choice for deep ultraviolet optoelectronic devices, high-power electronic devices, high-frequency Radio Frequency (RF) devices, etc. However, the difficulty in obtaining large-area, high-quality epitaxial layers, together with the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Peng Zhang, Mengyu Jin, Hongsen Li et al. · Enterprise Information Systems

A multi-population cooperative Jaya algorithm with adaptive rescheduling strategy for dynamic scheduling in semiconductor manufacturing system

Time-window constraints (TWCs) and dynamic disruptions complicate semiconductor wafer fabrication scheduling. To address this issue, we present a rescheduling approach incorporating deep reinforcement learning and the multi-population Jaya algorithm (DRL-MPJA). An adaptive DRL-based rescheduling trigger handles uncertain events, and the DRL agent adaptively selects the optimal strategy by real-time states and rewards. For complete rescheduling, three sub-populations optimise…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Cong Gao, Xusen Li, Haoying Liu et al. · Results in Chemistry

Research progress on levelers in acidic copper electroplating systems

Acidic copper electroplating is a core process for high-density electronic interconnections, where coating uniformity and void-free filling directly determine reliability. As via structures evolve toward higher aspect ratios and finer dimensions, levelers are essential for achieving defect-free superfilling through selective inhibition at protrusions while allowing deposition in recesses. This review summarizes the interfacial mechanisms of levelers in copper plating…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Meisam Abdollahi, S. Faegheh Yeganli, Amirali Baniasadi · Photonics

A Scoping Review on Intelligent Computing upon Silicon Photonics and Optical Network on Chips

The continuous expansion of data-intensive applications, including deep learning, autonomous control, and real-time analytics, has pushed conventional electronic computing toward its limits in performance and energy efficiency. Combining silicon photonics with Optical Network on Chip (ONoC) provides a pathway toward high-bandwidth and low-latency communication with reduced power consumption, positioning these technologies as promising enablers for next-generation intelligent…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Lina Qu, Lirong Yan, Jieru Chen et al. · International Review of Economics & Finance

Impact of US Entity List sanctions on Chinese firms’ export resilience: Evidence from intermediate import shocks

United States (US) Entity List sanctions against China have exposed Chinese firms to intermediate input supply shocks in the global supply chain, threatening the security and stability of China’s industrial and supply chains. Based on matched data of Chinese listed firms and the China Customs Trade database, this study employs a fixed effects model to investigate how US Entity List sanctions affect Chinese firms’ export resilience through intermediate goods imports. The…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Xin Li, Arthur Southard, Brandon Neil et al. · IMAPSource Proceedings

High-Temperature Resistant Laser-Release Material for Advanced Packaging Temporary Bonding/Debonding Applications

High‑temperature process steps are becoming increasingly prevalent in advanced packaging as the industry advances toward high‑density 3D architectures. Techniques such as plasma‑enhanced chemical vapor deposition (PECVD), hybrid bonding, silver sintering, encapsulant curing, and thermal compression bonding—commonly performed between 250°C and 350°C—introduce significant demands for temporary bonding/debonding (TBDB) materials. These elevated temperatures challenge the…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Nazeef Azam, Tanya Singh‐Rachford, John Coonrod et al. · IMAPSource Proceedings

Domestic Build-Up Film Advancing Fan-Out Wafer-Level Packaging (FOWLP) Through the SHIELD USA Program

Build-up films (BUF) serve as critical dielectric layers in advanced package substrates, where they enable fine pitch interconnects, multilayer redistribution routing, and the high-density integration required for next generation semiconductor devices. These engineered polymeric dielectrics are formulated to achieve a combination of low dielectric constant (Dk) and low dissipation factor (Df), while maintaining excellent thermal, mechanical, and electrical reliability. Key…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Pei Lien Tseng, Yiu-Hsiang Chang, Kuan‐Ting Kuo et al. · IMAPSource Proceedings

Single Bath Copper Electroplating for Seam Free Metallization of Ultra High Aspect Ratio (AR ≤ 34) Through Glass Vias

This work demonstrates a single-bath Cu electroplating process for void-free, seam-free filling of through glass via (TGV) with aspect ratio (AR) up to 34 using direct current (DC) control. Glass substrates of thickness 340 μm and via openings of 10 and 25 μm were studied. A virgin make-up solution with functional additives was developed. Under DC potential control, a suppressor system based on NBT and Tetronic 701 enabled rapid formation of a short H-shaped bridge (~10 μm)…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Eunah Ko, Ohguk Kwon, 김유나 et al. · IMAPSource Proceedings

Warpage Control Strategies in 3D Advanced Packaging: A Focus on Post-Processing and Material-Level Optimization

As semiconductor architectures vertically scale through high-density 3D advanced packaging, wafer-level warpage introduces severe failure modes that threaten process yield and structural reliability. Driven by the coefficient of thermal expansion (CTE) mismatch between heterogeneous materials, uncontrolled warpage induces critical defects—such as warpage induced cracks and difficulties in post processing—while complicating the package integration. To address these…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Amy Palesko Lujan, John Lau · IMAPSource Proceedings

Cost Analysis of 310x310mm Panels for High-Performance Computing Driven by Artificial Intelligence

Using square or rectangular panels instead of round wafers has been a topic of interest in the microelectronics packaging industry for years. A more recent addition to the discussion is the potential to use panels for advanced packaging applications. This contrasts with earlier panel-level analyses that focused on smaller, basic fan-out packages. Whether evaluating panels for simpler or more complex packages, one primary focus of any panel-level discussion is the potential…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Simon Dawson, Janet Hopkins, Richard Barnett et al. · IMAPSource Proceedings

Plasma Dicing Innovations on Film Frame Carriers for High-Bandwidth Memory (HBM) and Heterogeneous Integration Devices

The rapid adoption of AI and high-bandwidth memory (HBM) is increasing the demands on die thinning, singulation quality, and hybrid bonding readiness. This paper demonstrates an integrated digital lithography and plasma dicing process on film frame carriers (FFCs) for advanced packaging and HBM applications. The flow combines spray-coated photoresist, maskless exposure, oxide and silicon plasma etching, and plasma resist stripping to enable precise 8 μm dicing streets on…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Matt Heidel, Jeb H. Flemming, Kyle McWethy et al. · IMAPSource Proceedings

Microfluidic Cooling Integrated into Glass Substrates

In this work, 3D Glass Solutions (3DGS) presents an advanced glass-based interposer architecture with embedded single-phase liquid cooling. This combined interposer architecture possesses all the standard building blocks of a typical interposer package, including: top-side flip chip IC, multiple layer electrical redistribution, through glass vias for digital and RF (50Ω) I/Os, and bottom-side BGA for PCB assembly. In addition to these interposer features, the substrate…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Adeel Ahmad Bajwa, Anton Turpault, Frank Wang et al. · IMAPSource Proceedings

A Combined Atmospheric Argon Plasma and In-Situ Formic Acid Vapor Fluxless TCB Process for Advanced Packaging

This work investigates the fundamental interactions of both formic acid (FA) vapor and atmospheric plasma with Sn metal and its oxides (SnO and SnO₂) and compares their performance in fluxless TCB. Plasma-only processing was found to risk void formation and incomplete oxide removal due to its highly directional nature and sensitivity to exposure conditions. Prior work has shown that FA-related contamination strongly depends on initial oxide thickness, with thick SnO₂ layers…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ryosuke Yamazaki, Hsiang Chuan Chen, Joseph R. Sootsman et al. · IMAPSource Proceedings

Multifunctional Silicone Hotmelt Materials Integrating Stress Relaxation and Thermal Management for Advanced Electronic

Advanced electronic packaging technologies, including wafer-level packaging (WLP) and panel-level packaging (PLP), increasingly require thinner and larger substrates to support high-throughput manufacturing. At the same time, flexible and foldable electronic devices are rapidly emerging, further increasing the demand for encapsulant and adhesive materials with both high mechanical compliance and effective thermal stress management. Conventional organic-based materials, such…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sheng Hung Chou, Sze Pei Lim, Chun Wei Yang · IMAPSource Proceedings

Material Solutions for AI/HPC Packaging from Wafer Bumping to System Assembly

Artificial intelligence (AI) has become a major driving force for advanced semiconductor packaging technologies used in high-performance computing (HPC). Unlike traditional single-chip designs, advanced packaging such as chip on wafer on substrate (CoWoS) allows for heterogeneous integration, combining system on a chip (SoC), graphics processing units (GPUs), and high bandwidth memory (HBM) memory stacks into a single package. However, due to increased package complexity and…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sasi Kumar Tippabhotla, Ji Lin, Tai-Chong Chai · IMAPSource Proceedings

Towards a Digital Twin for Failure Risk Prediction of Epoxy Mold Compounds and Warpage Modeling in Advanced Packaging

In this work we present a predictive simulation model for epoxy mold compound (EMC), based-on advanced material characterization and inelastic material modelling. Tensile testing at different temperatures and loading rates was conducted to characterize the plasticity, creep and stress relaxation behaviors of the EMC material. Experimentally observed plasticity and creep behaviors are incorporated in the inelastic (viscoplastic) material model. A linear viscoelastic (LVE)…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kanji Matsumoto, Tomoharu Nakayama, Shinichiro Yoshida et al. · IMAPSource Proceedings

The Effect of Ni Content in Electroless Cu Deposit on the Adhesion Between the Seed Layer and Glass Substrate

In this paper, we discuss a method of improving the adhesion of the seed layer, consisting of a metal oxide deposit and electroless copper film, on the glass substrate. The rapid development of AI technology has dramatically increased the demand for High-Performance Computing (HPC), which requires the processing of massive datasets at extremely high speeds. To achieve high-performance processing for use in HPC, more chiplets should be mounted on a single substrate. As a…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Junlong Wang · Applied and Computational Engineering

A Study on Performance Comparison and Application Scenarios of PVD, CVD and ALD Thin-Film Deposition Processes

Semiconductor thin films are the core functional structures of microelectronic and optoelectronic devices. The thickness, uniformity, and density of the thin film directly determine the performance, lifespan, and stability of the device. With the continuous miniaturization and three-dimensionalization of semiconductor devices, traditional deposition processes are struggling to meet the high-precision coating requirements of high aspect ratio micro/nano structures. Therefore…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) L. Böttcher, Ruben Kahle, Andreas Ostmann · IMAPSource Proceedings

High Density Interconnect Scaling Beyond Organic Substrates Using Glass Cores

The rapidly increasing performance demands of chiplet based AI computing systems require advanced substrate technologies capable of supporting extremely high interconnect densities, low electrical losses, compact form factors, and reliable power delivery. Conventional organic core substrates, while mature and widely used, encounter fundamental geometric, electrical, and dimensional stability limitations when scaled to fine pitch interconnects in the single digit micrometer…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Inosh Perera, Scott Brossman, Diana Aranzales et al. · IMAPSource Proceedings

Enabling High-Density Power Packaging: Bridge and Fill for Through-Hole Filling in Advanced IC Substrate Core

Through-hole (TH) filling technology has emerged as a pivotal component in high-performance integrated circuit (IC) packaging, effectively addressing the electrical and thermal challenges posed by advanced applications such as artificial intelligence (AI), high-performance computing (HPC), and data center servers. AI accelerators and HPC modules are driving unprecedented increases in power density, with leading-edge AI devices exceeding 1 kW per package, and server…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Alan Lewis, Zubin Trivedi, Leonid Braun et al. · IMAPSource Proceedings

Digital Twin–Ready Underfill Simulation with High-Speed CFD

The rapid adoption of chiplet‑based packaging architectures has significantly increased the number of new package designs reaching production (tape‑out), driving demand for faster, more flexible backend process development. Underfill process optimization, already time‑consuming and costly for single‑die packages, becomes substantially more complex for multi‑die and heterogeneous chiplet designs due to intricate geometries, dense bump patterns, and tight process windows…

Read at Journal articles (OpenAlex)

Older stories