Chips and semiconductors: research

Journal articles, academic blogs, think-tank reports and papers in this section, newest first. Back to the news.

Journal articles (OpenAlex) Sandhya Arikatla, Vishal Chandrasekhar, Judy M. Amanor-Boadu et al. · IMAPSource Proceedings

Co-Engineering Packaging Architecture for Next Gen Data Center Xeon SoC

The rapid evolution of AI and High-Performance Computing (HPC) has driven the need for advanced modular packaging architectures (2D, 2D+ 2.5D, 3D & 3.5D). As workloads become more demanding and time-to-market (TTM) accelerates, robust, scalable, and efficient processor packages are needed. The innovations in advanced packaging architectures are intended to aid scalability and performance but also face challenges from increased SoC area, higher pin-counts, larger package form…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kaushik Rajashekara · World Electric Vehicle Journal

Autonomous Electric Vehicles as Mobile Data Centers: Energy, Emissions, and Mitigation Across Deployment Eras and Grid Scenarios

The rapid advancement of autonomous electric vehicles toward Level 4 full self-driving capability introduces a new and growing energy burden: onboard artificial intelligence computers and sensors require 450 to 1200 W of continuous system power during automated operation. This paper uses a 750 W reference that spans the full Level 4 system boundary—sensing, computing, networking, power conversion, and thermal management—based on the publicly available commercial hardware…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Muhammad Salman Ali, Noman Ahmed Khan, Fasiuddin Aijaz Mohammed et al. · Buildings

Combined Effects of Foundry Sand Replacement and Polypropylene Fiber Content on Slag Geopolymer Mortar Properties

Ground granulated blast-furnace slag (GGBFS)-based geopolymer mortar is a low-carbon alternative to ordinary Portland cement. However, its reliance on the availability of natural river sand and its inherent brittleness are major constraints from the viewpoint of environmental sustainability and resistance to cracking. Because the combined effect of waste foundry sand (WFS) and polypropylene (PP) fibers in slag geopolymers is largely unexplored, the present research examined…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) James Blatcher, Pugh Jon, Martin James Cryan · Journal of Optics

Design and automated testing of foundry-based high-contrast photonic integrated circuit distributed Bragg reflectors

Abstract This paper addresses the design challenges encountered when designing high index contrast distributed Bragg reflectors (DBR) using photonic integrated circuit (PIC) foundries. We use two example foundries, each with different lithography processes, one Deep-UltraViolet and one Electron-Beam to highlight important design considerations. We study two typical types of PIC DBR: width-varying and height-varying and compare and contrast their performances, first in…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Zihang Huang, Pengwei Tan, Xuran Zhu et al. · Chip

Room-temperature high-sensitivity hydrogen sensing using Pd/Al2O3/IGZO TFT with ultrathin ALD Al2O3 passivation-transport layer

ABSTRACT The development of room-temperature hydrogen microsensors still faces technical challenges. In this work, we report a Pd/Al 2 O 3 /IGZO thin film transistor (TFT) hydrogen sensor chip, which exhibits excellent hydrogen detection performance at room temperature. The sensor achieves a relative response of 100.2 to 1000 ppm hydrogen, a detection limit lower than 20 ppm, and a device area of 0.75 mm 2 . By inserting an ultrathin Al 2 O 3 passivation-transport layer…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) B Saraswathy, A. Anita Angeline · Journal of Engineering Research

ASIC-based design space exploration of precision-scalable multiplier architectures for edge AI accelerators

Deep Neural Networks (DNN) offer greater accuracy in artificial intelligence applications at the cost of increased computational complexity and substantial memory requirements. The traditional resource-rich cloud platform suffers from privacy and latency concerns, necessitating the shift of the computing paradigm from cloud to edge. As the majority of computations in DNN are multiply-and-add operations, realizing DNN hardware on edge devices requires energy-efficient…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Kyeongho Kim, Jae Ho Baek, Min A Bae · Results in Engineering

Multi-cycle wet regeneration of inorganic-binder waste foundry sand: alkali accumulation, humid strength, and an interpretable machine-learning analysis

Chemical wet regeneration of inorganic-binder waste foundry sand leaves alkali residue that accumulates over successive reuse cycles. This study resolves the resulting strength degradation and optimizes the process by machine learning. Multi-cycle experiments crossed the sand-binder system, thermal history, powder additives, and cleaning route. Chemical regeneration alone allowed Na2O and K2O to accumulate on the grain surface. In casting sand exposed to 700℃, powder…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Abishaan Ravikumar, Xiaohan Yang, Rajendra Prasad et al. · Integration

RTSXpress: A fast regression test selection framework for IC design verification

The semiconductor industry is undergoing rapid evolution, with microchips or Integrated Circuits (ICs) becoming increasingly complex due to their growing functionality and performance demands. This rise in complexity has made verification one of the most resource-intensive phases of the IC design cycle, where regression testing plays a central role in ensuring design correctness and reliability. Existing test selection and optimisation strategies have provided partial…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Tahdia Tahmid, Sharfan Upaul · Water Policy

Water footprint of large AI models: risks to global water security and sustainable optimization strategies

ABSTRACT Diagram linking AI model training and inference to lifecycle water use, estimated at 4.2–6.6 billion m³ annually by 2027, and showing water reuse, efficient cooling, smarter workloads, and standardized reporting as strategies to protect global water security. The rapid proliferation of large-scale artificial intelligence (AI) models has introduced a significant yet underexamined environmental challenge: freshwater consumption. This narrative review synthesizes…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Sivakumar Selvarasu, C. G Abraham, S. Madhukumar et al. · Journal of Circuits Systems and Computers

A Near Threshold SRAM Compute-in-Memory Transformer Accelerator with Adaptive Precision Scaling for Sub mW Edge AI Applications

The increasing trend towards the adoption of transformers in edge devices stipulates the need for ultralow power devices that also require high energy efficiency with power budget constraints. This article proposes a near-threshold SRAM compute-in-memory transformer accelerator with adaptive precision scaling for sub-mW edge AI applications. The architecture performs MAC operations directly inside a modified 6T SRAM cell, minimizing data movement between compute and memory…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Marie-Louise Lackner, Francesca Da Ros, Nysret Musliu · Journal of Scheduling

Theoretical lower bounds for a parallel batch scheduling problem

Abstract The Oven Scheduling Problem (OSP) is an NP-hard real-world parallel batch scheduling problem arising in the semiconductor industry. Its objective is to schedule a set of jobs on ovens while minimizing total oven runtime, job tardiness, and setup costs. At the same time, it must adhere to various constraints such as oven eligibility and availability, job release dates, setup times between batches, and oven capacity limitations. In this paper, we develop theoretical…

Read at Journal articles (OpenAlex)

Stimson Center Joaquin Matamis Geopolitics

A New Transatlantic Equilibrium

Europe and America need to find a new working relationship. The possible paths forward include evolution, rupture, and renewal.

Read at Stimson Center

Journal articles (OpenAlex) Amelia Hasenauer, Kristian Ivkovic, Samuel Thalmann et al. · Biofabrication

In-chip volumetric printing of perfusable and stretchable collagen-I scaffolds for mammary tissue models

Engineered epithelial models require three-dimensional extracellular matrix environments that support organized cell growth and allow independent access to luminal and basal compartments.However, many organ-on-chip (OoC) fabrication strategies rely on planar geometries, nonnative materials, or multi-step assembly workflows that limit architectural complexity and experimental control. Here, we report a direct in-chip volumetric printing strategy for fabricating stretchable…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Naná de Graaff, Jaša Veselinovič, Adam Geoffrey Tyler · New Political Economy Geopolitics

Globalization unravelling? ASML and the geopolitics of Europe-China tech decoupling

This article investigates the geopolitical dynamics driving Europe’s emerging technological decoupling from China. Focusing on the semiconductor industry and the Dutch semiconductor firm ASML, it examines how technonationalism emanating from the US has shaped a small European member state’s policy response amid intensifying US-China rivalry. The article analyses how national security arguments and US strategic influence aimed at undermining China’s advances in high-tech has…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yang Han, Yoichi Tanaka, Yusuke Okazaki et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Corrosion-Free Copper Pad Recess Enabled by Wet Acid Etching and Functional Water Rinse for Hybrid Bonding Applications

This study presents a novel cyclic wet etching process based on citric acid for the controlled recessing of copper (Cu) pads, aimed at improving wafer-to-wafer (W2W) and die-to-wafer (D2W) hybrid bonding in advanced packaging applications. Conventional chemical mechanical polishing (CMP) struggles to prevent corrosion and excessive recessing of the Cu pads, particularly when they are connected to long metal lines. These issues compromise the quality and reliability of…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Bumsik Kim, Sang Woo Lim · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Selective Wet Etching of SiO2 through Fluorine Species Control

The selective wet etching of silicon dioxide (SiO 2 ) over silicon nitride (Si 3 N 4 ) is a critical process in semiconductor fabrication. In this study, the etching behavior of SiO 2 in HF solution was investigated by analyzing the individual contributions of F – , HF, and HF 2 – . Contrary to the previously proposed etching mechanism of SiO 2 , the etching of SiO 2 was observed even when the HF 2 – concentration was significantly low. This suggests that F – and HF also…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Hiroaki Iwamoto, Kohei Endo, Kenta Natsukawa et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Dissolution and Removal of Ceria Particles by Post-CMP Cleaner

Chemical mechanical planarization (CMP) employing ceria (CeO2) abrasives is widely regarded as a critical process in semiconductor manufacturing due to their superior removal rates for SiO 2 films compared to other abrasives. However, the efficient removal of ceria residues from the surface remains a significant challenge. Ceria particles are strongly adhered to SiO 2 surfaces through both chemical and electrostatic interactions. In this study, we developed a post-CMP…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Amaia Diaz De Zerio, Ivonne Saucedo Hernandez, Mariacristina Colantuono et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Assessment of Stripping Efficiency of Non-TMAH Based Solvents on Photoresist and Temporary Bonding Materials

Effective removal of photoresist (PR) and Temporary Bonding Materials (TBM) is critical in advanced packaging and three-dimensional integration (3Di) processes within semiconductor manufacturing. Traditional wet stripping methods, primarily based on tetramethylammonium hydroxide (TMAH), offer high performance but pose significant environmental and health risks. To address these concerns, this study explores the use of water-based, environmentally benign stripping…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Yoojin Son, Pengzhan Liu, Yuna Nam et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Effect of Pad Pore Size and Applied Pressure on Environmentally Friendly Buff Cleaning Using Gas-Dissolved Water for Ceria Nanoparticle Removal

This study investigates an environmentally friendly buff cleaning technique aimed at removing ceria nanoparticles remaining after chemical mechanical planarization (CMP), a critical step in semiconductor fabrication where post-cleaning is essential to prevent yield loss caused by particle contamination. Gas-dissolved water (GDW), prepared by dissolving CO₂ or N₂ into DI water, was utilized to generate micro-and nanobubbles that assist in particle detachment through physical…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Meiyan Chen, Yue Zhang, Xuan Liu et al. · Frontiers in Materials

Ion-implantation-induced polyimide reconstruction and Cu interfacial adhesion

Reliable metallization of polymer substrates is essential for flexible electronics, advanced packaging, and high-frequency systems, yet achieving strong metal/polymer adhesion while maintaining good electrical performance remains challenging. Here, carbon-ion, nitrogen-ion, and carbon/nitrogen dual-ion implantation were used to modify polyimide, with the implantation conditions independently adjusted to obtain nearly identical surface free energies of 46.43–47.22 mJ m -2…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Ahmad Masoud, Dawei Luo, Zhongxiang Yu et al. · Advanced Materials Technologies

Mechanism‐Driven Purification of High‐Purity Quartz: Impurity Speciation, Surface Chemistry, and Advanced Beneficiation Technologies

ABSTRACT High‐purity quartz (HPQ) is essential for semiconductor manufacturing, photovoltaics, optical systems, and other advanced technologies, where even trace impurities can compromise material performance. Despite extensive research on quartz beneficiation, the mechanisms governing impurity removal, interfacial reactions, and purification efficiency remain poorly understood. This review establishes a mechanism‐driven framework linking geological provenance, impurity…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Junxiong FANG, Zenghao Song, Yanling Xue et al. · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment

Sensitive X-ray inspection and classification for micron-scale metal contaminants inside patterned and resin-encapsulated wafers

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) Mai Nagase, Kensuke Shinohara, Takahiro Yamaguchi · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

In Situ Monitoring for Wet Rinse Process Using Electrochemical Impedance Spectroscopy on Sensing Wafers

In recent years, the interest in reducing environmental impact has been increasing. This trend is evident in the semiconductor manufacturing, where the development of a tool that can simultaneously offer environmental friendliness and high performance is becoming more in demand. The semiconductor cleaning process, which uses a significant amount of liquids, is one area where reduction efforts are particularly needed. To reduce the consumption of liquids, it is crucial to…

Read at Journal articles (OpenAlex)

Journal articles (OpenAlex) 小川義宏 · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena

Recent Developments in AI Technology and Its Application to Wet Process Optimization

Recent advancements in artificial intelligence (AI) have increased the need for high-performance, high-capacity semiconductors. Consequently, cutting-edge semiconductor structures have become increasingly complex, requiring highly precise optimization in manufacturing processes, and achieving high yield rates within short periods has become challenging. This study focuses on the use of various yield improvement and process development methods using AI in semiconductor…

Read at Journal articles (OpenAlex)

Older stories